Tile Roof Installation cost: Albany vs Hillsboro (2026)
Albany runs 4% lower than Hillsboro for tile roof installation — expect around $18,600 in Albany against $19,350 in Hillsboro, a difference of about $750.
Albany OR
Lower costTypically around $18,600
Hillsboro OR
Typically around $19,350
Albany vs Hillsboro: full breakdown
| Factor | Albany | Hillsboro |
|---|---|---|
| Typical 2026 cost | $18,600 | $19,350 |
| Estimated range | $11,100–$26,050 | $11,550–$27,150 |
| Labor index (vs US) | ×1.03 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,150 | $11,600 |
| Materials/equipment | $7,450 | $7,750 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
A 4% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Tile roof installation by type: Albany vs Hillsboro
We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Albany | Hillsboro |
|---|---|---|
| Concrete tile | $11,100–$21,950 | $11,550–$22,850 |
| Clay / terracotta tile | $14,700–$29,150 | $15,300–$30,350 |
| Slate | $20,900–$51,800 | $21,750–$53,950 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Albany vs Hillsboro
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Albany | Hillsboro |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,500–$14,700 | $7,800–$15,300 |
| 1,500 sq ft (15 squares) | $9,550–$19,850 | $9,950–$20,700 |
| 2,000 sq ft (20 squares) | $11,100–$26,050 | $11,550–$27,150 |
| 2,500 sq ft (25 squares) | $13,700–$31,200 | $14,250–$32,500 |
| 3,000+ sq ft (30 squares) | $16,800–$37,400 | $17,450–$38,950 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a tile roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Albany; we use Oregon regional price parity instead.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Albany vs Hillsboro
Is tile roof installation cheaper in Albany or Hillsboro?
Albany wins on price: tile roof installation runs about $18,600 there versus $19,350 in Hillsboro, a gap of roughly $750 (4%) as of 2026.
Why does tile roof installation cost more in Hillsboro than Albany?
Labor rates explain most of it — 1.07 in Hillsboro vs 1.03 in Albany. A mixed climate versus mixed accounts for the rest.
How much is tile roof installation in Albany, OR?
Albany homeowners can expect $11,100 to $26,050 for tile roof installation in 2026, with $18,600 the typical number.
When is the cheapest time to buy tile roof installation — and does it differ by city?
The best window is the same in both Albany and Hillsboro: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on tile roof installation cost?
That would be a stretch. $750 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Hillsboro can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik