Tile Roof Installation cost: Albany vs Gresham (2026)
Albany runs 4% lower than Gresham for tile roof installation — expect around $18,600 in Albany against $19,350 in Gresham, a difference of about $750.
Albany OR
Lower costTypically around $18,600
Gresham OR
Typically around $19,350
Albany vs Gresham: full breakdown
| Factor | Albany | Gresham |
|---|---|---|
| Typical 2026 cost | $18,600 | $19,350 |
| Estimated range | $11,100–$26,050 | $11,550–$27,150 |
| Labor index (vs US) | ×1.03 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,150 | $11,600 |
| Materials/equipment | $7,450 | $7,750 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
How much should this gap actually matter?
4% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Tile roof installation by type: Albany vs Gresham
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Albany | Gresham |
|---|---|---|
| Concrete tile | $11,100–$21,950 | $11,550–$22,850 |
| Clay / terracotta tile | $14,700–$29,150 | $15,300–$30,350 |
| Slate | $20,900–$51,800 | $21,750–$53,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Tile roof installation by roof size: Albany vs Gresham
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Albany | Gresham |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,500–$14,700 | $7,800–$15,300 |
| 1,500 sq ft (15 squares) | $9,550–$19,850 | $9,950–$20,700 |
| 2,000 sq ft (20 squares) | $11,100–$26,050 | $11,550–$27,150 |
| 2,500 sq ft (25 squares) | $13,700–$31,200 | $14,250–$32,500 |
| 3,000+ sq ft (30 squares) | $16,800–$37,400 | $17,450–$38,950 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Albany; we use Oregon regional price parity instead.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Albany vs Gresham
Is tile roof installation cheaper in Albany or Gresham?
Yes — Gresham costs more. Expect around $19,350 for tile roof installation there against $18,600 in Albany, about $750 (4%) apart in 2026.
Why does tile roof installation cost more in Gresham than Albany?
The main driver is local labor rates: Gresham's labor index is 1.07 versus 1.03 in Albany. Climate zone (mixed vs mixed) also shift the total.
How much is tile roof installation in Albany, OR?
Expect to pay $11,100 to $26,050 for tile roof installation in Albany in 2026, averaging around $18,600.
When is the cheapest time to buy tile roof installation — and does it differ by city?
The best window is the same in both Albany and Gresham: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on tile roof installation cost?
Probably not. Yes, $750 is a real gap, but it's a one-time cost you can partly offset in Gresham with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik