Tile Roof Installation cost: Akron vs Cleveland (2026)
Akron runs 1% lower than Cleveland for tile roof installation — expect around $17,150 in Akron against $17,250 in Cleveland, a difference of about $100.
Akron OH
Lower costTypically around $17,150
Cleveland OH
Typically around $17,250
Akron vs Cleveland: full breakdown
| Factor | Akron | Cleveland |
|---|---|---|
| Typical 2026 cost | $17,150 | $17,250 |
| Estimated range | $10,250–$24,050 | $10,300–$24,200 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $10,300 | $10,350 |
| Materials/equipment | $6,850 | $6,900 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
How much should this gap actually matter?
A 1% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Tile roof installation by type: Akron vs Cleveland
Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Akron | Cleveland |
|---|---|---|
| Concrete tile | $10,250–$20,250 | $10,300–$20,350 |
| Clay / terracotta tile | $13,600–$26,900 | $13,650–$27,050 |
| Slate | $19,300–$47,850 | $19,400–$48,150 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Akron vs Cleveland
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Akron | Cleveland |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,900–$13,600 | $6,950–$13,650 |
| 1,500 sq ft (15 squares) | $8,800–$18,350 | $8,850–$18,450 |
| 2,000 sq ft (20 squares) | $10,250–$24,050 | $10,300–$24,200 |
| 2,500 sq ft (25 squares) | $12,650–$28,800 | $12,700–$29,000 |
| 3,000+ sq ft (30 squares) | $15,500–$34,500 | $15,600–$34,750 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Cheapest time for tile roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Akron vs Cleveland
Is tile roof installation cheaper in Akron or Cleveland?
Akron comes out ahead here, at roughly $17,150 for tile roof installation compared with $17,250 in Cleveland — a 1% ($100) gap as of 2026.
Why does tile roof installation cost more in Cleveland than Akron?
The main driver is local labor rates: Cleveland's labor index is 0.96 versus 0.95 in Akron. Climate zone (cold vs cold) also shift the total.
How much is tile roof installation in Akron, OH?
In Akron, tile roof installation typically runs $10,250–$24,050 in 2026, with most homeowners paying around $17,150.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Akron and Cleveland (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
Probably not. Yes, $100 is a real gap, but it's a one-time cost you can partly offset in Cleveland with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik