Tile Roof Installation cost: Akron vs Cleveland Heights (2026)
The two metros aren't quite in sync on tile roof installation: Akron sits 1% below Cleveland Heights, or roughly $17,150 versus $17,250 — about $100 apart.
Akron OH
Lower costTypically around $17,150
Cleveland Heights OH
Typically around $17,250
Akron vs Cleveland Heights: full breakdown
| Factor | Akron | Cleveland Heights |
|---|---|---|
| Typical 2026 cost | $17,150 | $17,250 |
| Estimated range | $10,250–$24,050 | $10,300–$24,200 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $10,300 | $10,350 |
| Materials/equipment | $6,850 | $6,900 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
How much should this gap actually matter?
A 1% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Tile roof installation by type: Akron vs Cleveland Heights
Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Akron | Cleveland Heights |
|---|---|---|
| Concrete tile | $10,250–$20,250 | $10,300–$20,350 |
| Clay / terracotta tile | $13,600–$26,900 | $13,650–$27,050 |
| Slate | $19,300–$47,850 | $19,400–$48,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Tile roof installation by roof size: Akron vs Cleveland Heights
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Akron | Cleveland Heights |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,900–$13,600 | $6,950–$13,650 |
| 1,500 sq ft (15 squares) | $8,800–$18,350 | $8,850–$18,450 |
| 2,000 sq ft (20 squares) | $10,250–$24,050 | $10,300–$24,200 |
| 2,500 sq ft (25 squares) | $12,650–$28,800 | $12,700–$29,000 |
| 3,000+ sq ft (30 squares) | $15,500–$34,500 | $15,600–$34,750 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Cheapest time for tile roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Akron vs Cleveland Heights
Is tile roof installation cheaper in Akron or Cleveland Heights?
Yes — Cleveland Heights costs more. Expect around $17,250 for tile roof installation there against $17,150 in Akron, about $100 (1%) apart in 2026.
Why does tile roof installation cost more in Cleveland Heights than Akron?
Labor rates explain most of it — 0.96 in Cleveland Heights vs 0.95 in Akron. A cold climate versus cold accounts for the rest.
How much is tile roof installation in Akron, OH?
tile roof installation in Akron runs $10,250–$24,050 as of 2026 — most jobs land near $17,150.
When is the cheapest time to buy tile roof installation — and does it differ by city?
The best window is the same in both Akron and Cleveland Heights: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on tile roof installation cost?
Not really — the $100 gap is one-time, and smart timing and tighter quotes in Cleveland Heights can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik