Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Akron vs Canton (2026)

The two metros aren't quite in sync on tile roof installation: Akron sits 2% above Canton, or roughly $17,150 versus $16,850 — about $300 apart.

Akron OH

$10,250 $24,050

Typically around $17,150

Canton OH

Lower cost
$10,050 $23,600

Typically around $16,850

tile roof installation runs about $300 (2%) more in Akron than in Canton, driven mostly by local labor rates.
Side by side

Akron vs Canton: full breakdown

FactorAkronCanton
Typical 2026 cost$17,150$16,850
Estimated range$10,250–$24,050$10,050–$23,600
Labor index (vs US)×0.95×0.93
Climate zoneColdCold
Climate factor×1×1
Local permit$250$250
Labor share$10,300$10,100
Materials/equipment$6,850$6,750

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

The verdict

Is the price difference a dealbreaker?

A 2% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.

By type

Tile roof installation by type: Akron vs Canton

Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.

TypeAkronCanton
Concrete tile$10,250$20,250$10,050$19,850
Clay / terracotta tile$13,600$26,900$13,350$26,400
Slate$19,300$47,850$18,950$46,950

These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.

By size

Tile roof installation by roof size: Akron vs Canton

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeAkronCanton
1,000 sq ft (10 squares)$6,900$13,600$6,800$13,350
1,500 sq ft (15 squares)$8,800$18,350$8,650$18,000
2,000 sq ft (20 squares)$10,250$24,050$10,050$23,600
2,500 sq ft (25 squares)$12,650$28,800$12,400$28,250
3,000+ sq ft (30 squares)$15,500$34,500$15,200$33,850

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

Best time to buy

Cheapest time for tile roof installation in either city

Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.

Our take

The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.

FAQ

Akron vs Canton

Is tile roof installation cheaper in Akron or Canton?

Canton wins on price: tile roof installation runs about $16,850 there versus $17,150 in Akron, a gap of roughly $300 (2%) as of 2026.

Why does tile roof installation cost more in Akron than Canton?

Akron's higher labor index (0.95 vs 0.93 in Canton) is the biggest factor, with the cold/cold climate split playing a smaller role.

How much is tile roof installation in Akron, OH?

Expect to pay $10,250 to $24,050 for tile roof installation in Akron in 2026, averaging around $17,150.

When is the cheapest time to buy tile roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Akron and Canton, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on tile roof installation cost?

Rarely. The $300 difference is real but one-time, and you can often close most of it in Akron by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik