Metal Roof Installation cost: Redmond vs Spokane (2026)
Budget-wise, metal roof installation in Redmond ($25,950) runs 17% more than in Spokane ($22,200), a roughly $3,750 spread.
Redmond WA
Typically around $25,950
Spokane WA
Lower costTypically around $22,200
Redmond vs Spokane: full breakdown
| Factor | Redmond | Spokane |
|---|---|---|
| Typical 2026 cost | $25,950 | $22,200 |
| Estimated range | $15,800–$36,050 | $13,550–$30,850 |
| Labor index (vs US) | ×1.19 | ×1.02 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $13,300 |
| Materials/equipment | $10,400 | $8,900 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
A 17% gap is meaningful on a project this size — about $3,750. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Redmond.
Metal roof installation by type: Redmond vs Spokane
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Redmond | Spokane |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,450–$18,600 |
| Standing-seam steel | $21,750–$42,000 | $18,600–$35,950 |
| Aluminum | $17,000–$33,700 | $14,550–$28,800 |
| Copper | $36,050–$71,800 | $30,850–$61,400 |
| Zinc | $33,700–$65,850 | $28,800–$56,300 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Redmond vs Spokane
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Redmond | Spokane |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $11,500–$23,700 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $13,550–$30,850 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $16,600–$36,950 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $19,650–$43,050 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Spokane; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Redmond vs Spokane
Is metal roof installation cheaper in Redmond or Spokane?
In 2026, metal roof installation is cheaper in Spokane at about $22,200, versus $25,950 in Redmond — a difference of about $3,750 (17%).
Why does metal roof installation cost more in Redmond than Spokane?
Labor rates explain most of it — 1.19 in Redmond vs 1.02 in Spokane. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Redmond, WA?
metal roof installation in Redmond runs $15,800–$36,050 as of 2026 — most jobs land near $25,950.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Redmond and Spokane (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $3,750 is a real gap, but it's a one-time cost you can partly offset in Redmond with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik