Roofing · Redmond, WA
How much does metal roof installation cost in Redmond, WA? (2026)
In Redmond, metal roof installation runs $15,800–$36,050, with most paying around $25,950 — about 21% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $25,950
- Typical cost
- $25,950
- Labor vs US
- +14%
- Climate
- Mixed
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Redmond
- $15,800 on the low end, $36,050 on the high — metal roof installation in Redmond averages $25,950, about 21% above the national average.
- This estimate departs from the national number mainly because Redmond labor sits +14% versus the US average.
- Budget about $325 for the local Roofing permit; it's already included above.
- Service life runs 40–70 years on average; replacing on your schedule beats replacing on an emergency one.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Redmond
A typical Redmond metal roof installation of $25,950 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Redmond 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $6,200 – $14,300 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $9,275 – $21,425 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $325 |
| Total installed cost | $15,800 – $36,050 |
Split from the Redmond estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Redmond
- Redmond's labor rates sit about 14% higher than the national average (based on price levels for the Seattle-Tacoma-Bellevue metro area), pushing the price up.
- Redmond's Roofing permit runs roughly $325, which is already part of the number above.
Metal Roof Installation cost by roof size in Redmond
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Redmond 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,850 – $19,400 |
| 1,500 sq ft (15 squares) | $13,450 – $27,750 |
| 2,000 sq ft (20 squares) | $15,800 – $36,050 |
| 2,500 sq ft (25 squares) | $19,400 – $43,200 |
| 3,000+ sq ft (30 squares) | $22,950 – $50,350 |
National size ranges localized to Redmond labor and climate.
Metal Roof Installation cost by type in Redmond
| Corrugated steel (exposed fastener) | $11,050 – $21,750 |
| Standing-seam steel | $21,750 – $42,000 |
| Aluminum | $17,000 – $33,650 |
| Copper | $36,050 – $71,750 |
| Zinc | $33,650 – $65,800 |
Adjusted to Redmond from national type-level ranges.
Metal Roof Installation cost by efficiency in Redmond
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,850 – $21,750 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $15,800 – $36,050 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $30,100 – $59,900 |
Labor vs. materials in Redmond
Install crew, removal, permit & startup — the part Redmond rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $25,950 Redmond project; your mix varies with scope.
Skilled installers in the Seattle-Tacoma-Bellevue area earn about $41.1/hr (32% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Redmond labor adjustment | ×1.19 |
| mixed climate factor | ×1 |
| Local permit | +$325 |
| Redmond estimate | $15,800 – $36,050 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
Treat them as possibilities, not certainties — the ones that reach your quote follow your property's age and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Underlayment, fasteners and trim
- Tear-off of the old roof
- Metal panels or standing-seam system
What affects the cost
- Metal: steel, aluminum, copper or zinc
- Roof complexity and number of penetrations
- Whether existing roof can be overlaid
- Panel type (exposed-fastener vs standing seam)
Ways to save on metal roof installation in Redmond
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
- Steel standing seam balances cost and longevity
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Redmond?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Redmond
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Redmond?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Redmond, WA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Redmond, WA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $8,350–$14,300 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $9,500–$19,050 | $550/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $21,400–$38,100 | $550/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $23,800–$47,600 | $550/yr |
Per-square ranges are national installed benchmarks localized to Redmond, WA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Redmond
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why metal roof installation quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
Get an apples-to-apples bid
- Compare the workmanship warranty, not just the material warranty.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask Redmond Roofing pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Redmond
How much does metal roof installation cost in Redmond, WA?
Most Redmond homeowners pay around $25,950 for metal roof installation, though 2026 quotes stretch from $15,800 to $36,050. We localize this using Redmond's labor rates, mixed-climate adjustments and permit fees — no separate math needed.
Is metal roof installation more expensive in Redmond than average?
Put Redmond next to the national picture and it lands about 21% higher than the national average; the labor index of 1.19 explains the bulk of it., with the local Roofing permit adding roughly $325.
Do I need a permit for metal roof installation in Redmond?
The estimate above already covers the Roofing permit Redmond generally requires for this job, so the $325 or so it costs won't land as a surprise.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Expect equipment/material grade, home size and complexity, local labor rates and the mixed climate zone to matter most here.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Redmond using the BLS metro wage data labor index (×1.19 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Redmond metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Redmond
Homeowners in Redmond often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Redmond
Browse local 2026 costs for every home project in Redmond, WA.