Metal Roof Installation cost: Oklahoma City vs Tulsa (2026)
Oklahoma City runs 1% higher than Tulsa for metal roof installation — expect around $20,850 in Oklahoma City against $20,600 in Tulsa, a difference of about $250.
Oklahoma City OK
Typically around $20,850
Tulsa OK
Lower costTypically around $20,600
Oklahoma City vs Tulsa: full breakdown
| Factor | Oklahoma City | Tulsa |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,600 |
| Estimated range | $12,700–$28,950 | $12,550–$28,650 |
| Labor index (vs US) | ×0.96 | ×0.95 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,350 |
| Materials/equipment | $8,350 | $8,250 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Oklahoma City vs Tulsa
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Oklahoma City | Tulsa |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,850–$17,450 | $8,750–$17,300 |
| Standing-seam steel | $17,450–$33,700 | $17,300–$33,350 |
| Aluminum | $13,650–$27,000 | $13,500–$26,750 |
| Copper | $28,950–$57,600 | $28,650–$57,000 |
| Zinc | $27,000–$52,850 | $26,750–$52,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Oklahoma City vs Tulsa
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Oklahoma City | Tulsa |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,550 | $7,800–$15,400 |
| 1,500 sq ft (15 squares) | $10,750–$22,250 | $10,650–$22,000 |
| 2,000 sq ft (20 squares) | $12,700–$28,950 | $12,550–$28,650 |
| 2,500 sq ft (25 squares) | $15,550–$34,650 | $15,400–$34,300 |
| 3,000+ sq ft (30 squares) | $18,400–$40,400 | $18,200–$40,000 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Oklahoma City metro · about 7% below the US average installer wage.
No BLS metro wage series for Tulsa; we use Oklahoma regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Oklahoma City vs Tulsa
Is metal roof installation cheaper in Oklahoma City or Tulsa?
Tulsa comes out ahead here, at roughly $20,600 for metal roof installation compared with $20,850 in Oklahoma City — a 1% ($250) gap as of 2026.
Why does metal roof installation cost more in Oklahoma City than Tulsa?
The main driver is local labor rates: Oklahoma City's labor index is 0.96 versus 0.95 in Tulsa. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Oklahoma City, OK?
In Oklahoma City, metal roof installation typically runs $12,700–$28,950 in 2026, with most homeowners paying around $20,850.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Oklahoma City and Tulsa (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $250 is a real gap, but it's a one-time cost you can partly offset in Oklahoma City with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik