Metal Roof Installation cost: Oklahoma City vs Stillwater (2026)
Metal roof installation costs about the same in Oklahoma City and Stillwater in 2026 — roughly $20,850 in each.
Oklahoma City OK
Typically around $20,850
Stillwater OK
Typically around $20,850
Oklahoma City vs Stillwater: full breakdown
| Factor | Oklahoma City | Stillwater |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,850 |
| Estimated range | $12,700–$28,950 | $12,700–$28,950 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,500 |
| Materials/equipment | $8,350 | $8,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Basically a tie — focus on the contractor
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Oklahoma City vs Stillwater
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Oklahoma City | Stillwater |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,850–$17,450 | $8,850–$17,450 |
| Standing-seam steel | $17,450–$33,700 | $17,450–$33,700 |
| Aluminum | $13,650–$27,000 | $13,650–$27,000 |
| Copper | $28,950–$57,600 | $28,950–$57,600 |
| Zinc | $27,000–$52,850 | $27,000–$52,850 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Oklahoma City vs Stillwater
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Oklahoma City | Stillwater |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,550 | $7,900–$15,550 |
| 1,500 sq ft (15 squares) | $10,750–$22,250 | $10,750–$22,250 |
| 2,000 sq ft (20 squares) | $12,700–$28,950 | $12,700–$28,950 |
| 2,500 sq ft (25 squares) | $15,550–$34,650 | $15,550–$34,650 |
| 3,000+ sq ft (30 squares) | $18,400–$40,400 | $18,400–$40,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Oklahoma City metro · about 7% below the US average installer wage.
Oklahoma City metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Oklahoma City vs Stillwater
Is metal roof installation cheaper in Oklahoma City or Stillwater?
There's no meaningful difference: metal roof installation runs about $20,850 in both places.
Why does metal roof installation cost more in Stillwater than Oklahoma City?
The main driver is local labor rates: Stillwater's labor index is 0.96 versus 0.96 in Oklahoma City. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Oklahoma City, OK?
metal roof installation in Oklahoma City runs $12,700–$28,950 as of 2026 — most jobs land near $20,850.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $28.9/hr in Oklahoma City compared with $28.9/hr in Oklahoma City (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Oklahoma City and Stillwater (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Oklahoma City and Stillwater — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik