Metal Roof Installation cost: Newark vs Sicklerville (2026)
In 2026, metal roof installation is about 19% more expensive in Newark than in Sicklerville. Most homeowners pay around $24,850 in Newark versus $20,850 in Sicklerville — a gap of roughly $4,000.
Newark NJ
Typically around $24,850
Sicklerville NJ
Lower costTypically around $20,850
Newark vs Sicklerville: full breakdown
| Factor | Newark | Sicklerville |
|---|---|---|
| Typical 2026 cost | $24,850 | $20,850 |
| Estimated range | $15,150–$34,500 | $12,700–$29,000 |
| Labor index (vs US) | ×1.14 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $250 |
| Labor share | $14,900 | $12,500 |
| Materials/equipment | $9,950 | $8,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
A 19% spread (roughly $4,000) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Newark typically recover some of it.
Metal roof installation by type: Newark vs Sicklerville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Newark | Sicklerville |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,550–$20,800 | $8,850–$17,500 |
| Standing-seam steel | $20,800–$40,200 | $17,500–$33,800 |
| Aluminum | $16,250–$32,200 | $13,650–$27,050 |
| Copper | $34,500–$68,650 | $29,000–$57,750 |
| Zinc | $32,200–$62,950 | $27,050–$52,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Newark vs Sicklerville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Newark | Sicklerville |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,450–$18,550 | $7,900–$15,600 |
| 1,500 sq ft (15 squares) | $12,850–$26,500 | $10,800–$22,300 |
| 2,000 sq ft (20 squares) | $15,150–$34,500 | $12,700–$29,000 |
| 2,500 sq ft (25 squares) | $18,550–$41,300 | $15,600–$34,750 |
| 3,000+ sq ft (30 squares) | $21,950–$48,150 | $18,450–$40,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
No BLS metro wage series for Sicklerville; we use New Jersey regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Newark vs Sicklerville
Is metal roof installation cheaper in Newark or Sicklerville?
In 2026, metal roof installation is cheaper in Sicklerville at about $20,850, versus $24,850 in Newark — a difference of about $4,000 (19%).
Why does metal roof installation cost more in Newark than Sicklerville?
The main driver is local labor rates: Newark's labor index is 1.14 versus 0.96 in Sicklerville. Climate zone (mixed vs mixed) and permit fees also shift the total.
How much is metal roof installation in Newark, NJ?
In Newark, metal roof installation typically runs $15,150–$34,500 in 2026, with most homeowners paying around $24,850.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Newark and Sicklerville (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $4,000 difference is real but one-time, and you can often close most of it in Newark by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik