Metal Roof Installation cost: Newark vs Paterson (2026)
There's essentially no price gap here: metal roof installation runs close to $24,850 in both Newark and Paterson in 2026.
Newark NJ
Typically around $24,850
Paterson NJ
Typically around $24,850
Newark vs Paterson: full breakdown
| Factor | Newark | Paterson |
|---|---|---|
| Typical 2026 cost | $24,850 | $24,850 |
| Estimated range | $15,150–$34,500 | $15,150–$34,500 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,900 | $14,900 |
| Materials/equipment | $9,950 | $9,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
No real cost edge either way
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Newark vs Paterson
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Newark | Paterson |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,550–$20,800 | $10,550–$20,800 |
| Standing-seam steel | $20,800–$40,200 | $20,800–$40,200 |
| Aluminum | $16,250–$32,200 | $16,250–$32,200 |
| Copper | $34,500–$68,650 | $34,500–$68,650 |
| Zinc | $32,200–$62,950 | $32,200–$62,950 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Newark vs Paterson
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Newark | Paterson |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,450–$18,550 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $12,850–$26,500 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $15,150–$34,500 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $18,550–$41,300 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $21,950–$48,150 | $21,950–$48,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Newark vs Paterson
Is metal roof installation cheaper in Newark or Paterson?
metal roof installation costs about the same in both — roughly $24,850 in each city.
Why does metal roof installation cost more in Paterson than Newark?
Paterson's higher labor index (1.14 vs 1.14 in Newark) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Newark, NJ?
Expect to pay $15,150 to $34,500 for metal roof installation in Newark in 2026, averaging around $24,850.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.3/hr around New York-Newark-Jersey City versus $38.3/hr near New York-Newark-Jersey City. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Newark and Paterson: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Newark and Paterson — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik