Metal Roof Installation cost: Montclair vs Paterson (2026)
There's essentially no price gap here: metal roof installation runs close to $24,850 in both Montclair and Paterson in 2026.
Montclair NJ
Typically around $24,850
Paterson NJ
Typically around $24,850
Montclair vs Paterson: full breakdown
| Factor | Montclair | Paterson |
|---|---|---|
| Typical 2026 cost | $24,850 | $24,850 |
| Estimated range | $15,150–$34,500 | $15,150–$34,500 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,900 | $14,900 |
| Materials/equipment | $9,950 | $9,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
A wash — choose on quality, not city
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Montclair vs Paterson
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Montclair | Paterson |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,550–$20,800 | $10,550–$20,800 |
| Standing-seam steel | $20,800–$40,200 | $20,800–$40,200 |
| Aluminum | $16,250–$32,200 | $16,250–$32,200 |
| Copper | $34,500–$68,650 | $34,500–$68,650 |
| Zinc | $32,200–$62,950 | $32,200–$62,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Montclair vs Paterson
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Montclair | Paterson |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,450–$18,550 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $12,850–$26,500 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $15,150–$34,500 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $18,550–$41,300 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $21,950–$48,150 | $21,950–$48,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Montclair vs Paterson
Is metal roof installation cheaper in Montclair or Paterson?
Practically identical — expect around $24,850 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Paterson than Montclair?
It comes down to labor: Paterson indexes at 1.14 against Montclair's 1.14. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Montclair, NJ?
metal roof installation in Montclair runs $15,150–$34,500 as of 2026 — most jobs land near $24,850.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.3/hr around New York-Newark-Jersey City versus $38.3/hr near New York-Newark-Jersey City. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Montclair and Paterson, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Montclair and Paterson. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik