Metal Roof Installation cost: Edison vs Montclair (2026)
Edison runs 13% lower than Montclair for metal roof installation — expect around $21,900 in Edison against $24,850 in Montclair, a difference of about $2,950.
Edison NJ
Lower costTypically around $21,900
Montclair NJ
Typically around $24,850
Edison vs Montclair: full breakdown
| Factor | Edison | Montclair |
|---|---|---|
| Typical 2026 cost | $21,900 | $24,850 |
| Estimated range | $13,350–$30,450 | $15,150–$34,500 |
| Labor index (vs US) | ×1.01 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,150 | $14,900 |
| Materials/equipment | $8,750 | $9,950 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
13% (about $2,950) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Montclair can close much of that gap.
Metal roof installation by type: Edison vs Montclair
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Edison | Montclair |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,350–$18,400 | $10,550–$20,800 |
| Standing-seam steel | $18,400–$35,500 | $20,800–$40,200 |
| Aluminum | $14,350–$28,450 | $16,250–$32,200 |
| Copper | $30,450–$60,650 | $34,500–$68,650 |
| Zinc | $28,450–$55,600 | $32,200–$62,950 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Edison vs Montclair
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Edison | Montclair |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,350 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,350–$23,400 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,350–$30,450 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,350–$36,500 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $19,400–$42,550 | $21,950–$48,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Edison; we use New Jersey regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Edison vs Montclair
Is metal roof installation cheaper in Edison or Montclair?
Yes — Montclair costs more. Expect around $24,850 for metal roof installation there against $21,900 in Edison, about $2,950 (13%) apart in 2026.
Why does metal roof installation cost more in Montclair than Edison?
It comes down to labor: Montclair indexes at 1.14 against Edison's 1.01. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Edison, NJ?
Expect to pay $13,350 to $30,450 for metal roof installation in Edison in 2026, averaging around $21,900.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Edison and Montclair, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $2,950 difference is real but one-time, and you can often close most of it in Montclair by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik