Metal Roof Installation cost: Maplewood vs Rochester (2026)
Maplewood runs 16% higher than Rochester for metal roof installation — expect around $25,050 in Maplewood against $21,550 in Rochester, a difference of about $3,500.
Maplewood MN
Typically around $25,050
Rochester MN
Lower costTypically around $21,550
Maplewood vs Rochester: full breakdown
| Factor | Maplewood | Rochester |
|---|---|---|
| Typical 2026 cost | $25,050 | $21,550 |
| Estimated range | $15,250–$34,850 | $13,100–$29,950 |
| Labor index (vs US) | ×1.11 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,050 | $12,950 |
| Materials/equipment | $10,000 | $8,600 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the gap worth worrying about?
That's a real $3,500 difference (16%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Maplewood can narrow it.
Metal roof installation by type: Maplewood vs Rochester
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Maplewood | Rochester |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $9,150–$18,050 |
| Standing-seam steel | $21,000–$40,600 | $18,050–$34,900 |
| Aluminum | $16,400–$32,550 | $14,100–$27,950 |
| Copper | $34,850–$69,350 | $29,950–$59,650 |
| Zinc | $32,550–$63,600 | $27,950–$54,700 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Maplewood vs Rochester
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Maplewood | Rochester |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $8,150–$16,100 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $11,150–$23,000 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $13,100–$29,950 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $16,100–$35,900 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $19,050–$41,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Rochester; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Maplewood vs Rochester
Is metal roof installation cheaper in Maplewood or Rochester?
Rochester wins on price: metal roof installation runs about $21,550 there versus $25,050 in Maplewood, a gap of roughly $3,500 (16%) as of 2026.
Why does metal roof installation cost more in Maplewood than Rochester?
It comes down to labor: Maplewood indexes at 1.11 against Rochester's 0.95. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Maplewood, MN?
metal roof installation in Maplewood runs $15,250–$34,850 as of 2026 — most jobs land near $25,050.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Maplewood and Rochester: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $3,500 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Maplewood can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik