Roofing · Maplewood, MN
How much does metal roof installation cost in Maplewood, MN? (2026)
In Maplewood, metal roof installation runs $15,250–$34,850, with most paying around $25,050 — about 17% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $25,050
- Typical cost
- $25,050
- Labor vs US
- +3%
- Climate
- Cold
- Local permit
- $300
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Maplewood
- A metal roof installation in Maplewood typically runs $15,250–$34,850, with most homeowners paying about $25,050 — about 17% above the national average.
- Maplewood labor runs +3% versus the US average — the main reason the local price differs from the national figure.
- Budget about $300 for the local Roofing permit; it's already included above.
- Expect 40–70 years of service, so planning a replacement beats a full-price emergency call.
- Booking during Late spring to early fall (dry, 45–85°F) typically saves about 5–10% versus peak-season pricing.
What goes into the price in Maplewood
A typical Maplewood metal roof installation of $25,050 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Maplewood 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $6,000 – $13,800 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $8,950 – $20,750 |
| Permit & feesLocal building-department fee for Roofing work here. | $300 |
| Total installed cost | $15,250 – $34,850 |
Split from the Maplewood estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Maplewood
- Expect labor here to run 3% above the national norm (based on price levels for the Minneapolis-St. Paul-Bloomington metro area) — that's what raises the total.
- The cold climate in Maplewood adds roughly 4% to typical metal roof installation pricing versus a neutral climate.
- Budget about $300 for the local Roofing permit in Maplewood — already folded into the estimate above.
Metal Roof Installation cost by roof size in Maplewood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Maplewood 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,500 – $18,700 |
| 1,500 sq ft (15 squares) | $12,950 – $26,750 |
| 2,000 sq ft (20 squares) | $15,250 – $34,850 |
| 2,500 sq ft (25 squares) | $18,700 – $41,750 |
| 3,000+ sq ft (30 squares) | $22,150 – $48,650 |
National size ranges localized to Maplewood labor and climate.
Metal Roof Installation cost by type in Maplewood
| Corrugated steel (exposed fastener) | $10,700 – $21,100 |
| Standing-seam steel | $21,100 – $40,700 |
| Aluminum | $16,450 – $32,600 |
| Copper | $34,950 – $69,550 |
| Zinc | $32,600 – $63,800 |
Adjusted to Maplewood from national type-level ranges.
Metal Roof Installation cost by efficiency in Maplewood
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,500 – $21,000 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $15,250 – $34,850 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $29,100 – $57,850 |
Labor vs. materials in Maplewood
Install crew, removal, permit & startup — the part Maplewood rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $25,050 Maplewood project; your mix varies with scope.
Skilled installers in the Minneapolis-St. Paul-Bloomington area earn about $36.7/hr (18% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Maplewood labor adjustment | ×1.11 |
| cold climate factor | ×1.04 |
| Local permit | +$300 |
| Maplewood estimate | $15,250 – $34,850 |
Promo prices vs. the real cost
After a regional storm, roofing ads get aggressive on price and vague on scope. Check what's actually covered before comparing:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
Treat them as possibilities, not certainties — the ones that reach your quote follow your property's age and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Underlayment, fasteners and trim
- Labor, cleanup and permit
- Tear-off of the old roof
What affects the cost
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
- Panel type (exposed-fastener vs standing seam)
- Whether existing roof can be overlaid
Ways to save on metal roof installation in Maplewood
- Compare lifetime cost, not just the install price
- Steel standing seam balances cost and longevity
- Metal's 40–70 yr life lowers lifetime cost
- Some insurers discount metal and impact-rated roofs
How long does metal roof installation last in Maplewood?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Maplewood
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Maplewood?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Maplewood, MN
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Maplewood, MN labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,750–$13,300 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,900–$17,750 | $550/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $20,000–$35,500 | $500/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $22,200–$44,400 | $550/yr |
Per-square ranges are national installed benchmarks localized to Maplewood, MN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Maplewood
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Why metal roof installation quotes vary — and how to compare them fairly
Big gaps between bids come down to scope far more often than greed. This breaks down the levers and how to force a like-for-like comparison.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Maplewood Roofing pros
The only honest way to compare is to hold every quote to one checklist. Start with these.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Maplewood
How much does metal roof installation cost in Maplewood, MN?
Budgeting for metal roof installation? In Maplewood, 2026 prices land between $15,250 and $34,850, and about $25,050 is the typical outcome. Local labor, the cold climate and permit fees are all baked into that number.
Is metal roof installation more expensive in Maplewood than average?
Why the gap? Maplewood prices about 17% higher than the national average, and local labor — indexed at 1.11 against the US average — does most of the work.; add in a Roofing permit at roughly $300.
Do I need a permit for metal roof installation in Maplewood?
A Roofing permit is standard in Maplewood for this kind of work, at roughly $300. You won't need to add it on top of the estimate above — it's already there.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. That's the baseline — the price moves from there. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the cold climate zone.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Maplewood using the BLS metro wage data labor index (×1.11 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Maplewood metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Maplewood
Homeowners in Maplewood often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Maplewood
Browse local 2026 costs for every home project in Maplewood, MN.