Metal Roof Installation cost: Kent vs Spokane (2026)
Kent runs 17% higher than Spokane for metal roof installation — expect around $25,950 in Kent against $22,200 in Spokane, a difference of about $3,750.
Kent WA
Typically around $25,950
Spokane WA
Lower costTypically around $22,200
Kent vs Spokane: full breakdown
| Factor | Kent | Spokane |
|---|---|---|
| Typical 2026 cost | $25,950 | $22,200 |
| Estimated range | $15,800–$36,050 | $13,550–$30,850 |
| Labor index (vs US) | ×1.19 | ×1.02 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $13,300 |
| Materials/equipment | $10,400 | $8,900 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
17% (about $3,750) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Kent can close much of that gap.
Metal roof installation by type: Kent vs Spokane
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Kent | Spokane |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,450–$18,600 |
| Standing-seam steel | $21,750–$42,000 | $18,600–$35,950 |
| Aluminum | $17,000–$33,700 | $14,550–$28,800 |
| Copper | $36,050–$71,800 | $30,850–$61,400 |
| Zinc | $33,700–$65,850 | $28,800–$56,300 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Kent vs Spokane
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Kent | Spokane |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $11,500–$23,700 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $13,550–$30,850 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $16,600–$36,950 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $19,650–$43,050 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Spokane; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Kent vs Spokane
Is metal roof installation cheaper in Kent or Spokane?
In 2026, metal roof installation is cheaper in Spokane at about $22,200, versus $25,950 in Kent — a difference of about $3,750 (17%).
Why does metal roof installation cost more in Kent than Spokane?
It comes down to labor: Kent indexes at 1.19 against Spokane's 1.02. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Kent, WA?
Kent homeowners can expect $15,800 to $36,050 for metal roof installation in 2026, with $25,950 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Kent and Spokane (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $3,750 gap is one-time, and smart timing and tighter quotes in Kent can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik