Metal Roof Installation cost: Kenner vs Shreveport (2026)
The two metros aren't quite in sync on metal roof installation: Kenner sits 3% above Shreveport, or roughly $21,650 versus $20,950 — about $700 apart.
Kenner LA
Typically around $21,650
Shreveport LA
Lower costTypically around $20,950
Kenner vs Shreveport: full breakdown
| Factor | Kenner | Shreveport |
|---|---|---|
| Typical 2026 cost | $21,650 | $20,950 |
| Estimated range | $13,200–$30,050 | $12,750–$29,100 |
| Labor index (vs US) | ×0.96 | ×0.93 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $250 |
| Labor share | $13,000 | $12,550 |
| Materials/equipment | $8,650 | $8,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
That 3% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Kenner vs Shreveport
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Kenner | Shreveport |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,150 | $8,900–$17,550 |
| Standing-seam steel | $18,150–$35,050 | $17,550–$33,900 |
| Aluminum | $14,200–$28,100 | $13,700–$27,200 |
| Copper | $30,050–$59,850 | $29,100–$57,950 |
| Zinc | $28,100–$54,900 | $27,200–$53,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Kenner vs Shreveport
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Kenner | Shreveport |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,150 | $7,950–$15,650 |
| 1,500 sq ft (15 squares) | $11,200–$23,100 | $10,850–$22,400 |
| 2,000 sq ft (20 squares) | $13,200–$30,050 | $12,750–$29,100 |
| 2,500 sq ft (25 squares) | $16,150–$36,000 | $15,650–$34,900 |
| 3,000+ sq ft (30 squares) | $19,150–$42,000 | $18,550–$40,650 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Kenner vs Shreveport
Is metal roof installation cheaper in Kenner or Shreveport?
Yes — Kenner costs more. Expect around $21,650 for metal roof installation there against $20,950 in Shreveport, about $700 (3%) apart in 2026.
Why does metal roof installation cost more in Kenner than Shreveport?
It comes down to labor: Kenner indexes at 0.96 against Shreveport's 0.93. The hot-vs-hot climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Kenner, LA?
Expect to pay $13,200 to $30,050 for metal roof installation in Kenner in 2026, averaging around $21,650.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Kenner and Shreveport, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not really — the $700 gap is one-time, and smart timing and tighter quotes in Kenner can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik