Metal Roof Installation cost: Kenner vs Lafayette (2026)
Budget-wise, metal roof installation in Kenner ($21,650) runs 3% more than in Lafayette ($21,100), a roughly $550 spread.
Kenner LA
Typically around $21,650
Lafayette LA
Lower costTypically around $21,100
Kenner vs Lafayette: full breakdown
| Factor | Kenner | Lafayette |
|---|---|---|
| Typical 2026 cost | $21,650 | $21,100 |
| Estimated range | $13,200–$30,050 | $12,850–$29,300 |
| Labor index (vs US) | ×0.96 | ×0.94 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $250 |
| Labor share | $13,000 | $12,650 |
| Materials/equipment | $8,650 | $8,450 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
3% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Kenner vs Lafayette
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Kenner | Lafayette |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,150 | $8,950–$17,700 |
| Standing-seam steel | $18,150–$35,050 | $17,700–$34,150 |
| Aluminum | $14,200–$28,100 | $13,800–$27,350 |
| Copper | $30,050–$59,850 | $29,300–$58,350 |
| Zinc | $28,100–$54,900 | $27,350–$53,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Kenner vs Lafayette
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Kenner | Lafayette |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,150 | $8,000–$15,750 |
| 1,500 sq ft (15 squares) | $11,200–$23,100 | $10,900–$22,500 |
| 2,000 sq ft (20 squares) | $13,200–$30,050 | $12,850–$29,300 |
| 2,500 sq ft (25 squares) | $16,150–$36,000 | $15,750–$35,100 |
| 3,000+ sq ft (30 squares) | $19,150–$42,000 | $18,650–$40,900 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Kenner vs Lafayette
Is metal roof installation cheaper in Kenner or Lafayette?
In 2026, metal roof installation is cheaper in Lafayette at about $21,100, versus $21,650 in Kenner — a difference of about $550 (3%).
Why does metal roof installation cost more in Kenner than Lafayette?
Labor rates explain most of it — 0.96 in Kenner vs 0.94 in Lafayette. A hot climate versus hot, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Kenner, LA?
Expect to pay $13,200 to $30,050 for metal roof installation in Kenner in 2026, averaging around $21,650.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Kenner and Lafayette (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $550 gap is one-time, and smart timing and tighter quotes in Kenner can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik