Metal Roof Installation cost: Janesville vs Kenosha (2026)
Budget-wise, metal roof installation in Janesville ($21,550) runs 6% less than in Kenosha ($22,900), a roughly $1,350 spread.
Janesville WI
Lower costTypically around $21,550
Kenosha WI
Typically around $22,900
Janesville vs Kenosha: full breakdown
| Factor | Janesville | Kenosha |
|---|---|---|
| Typical 2026 cost | $21,550 | $22,900 |
| Estimated range | $13,100–$29,950 | $13,950–$31,850 |
| Labor index (vs US) | ×0.95 | ×1.01 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $275 |
| Labor share | $12,950 | $13,750 |
| Materials/equipment | $8,600 | $9,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
6% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Janesville vs Kenosha
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Janesville | Kenosha |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,150–$18,050 | $9,750–$19,200 |
| Standing-seam steel | $18,050–$34,900 | $19,200–$37,100 |
| Aluminum | $14,100–$27,950 | $15,000–$29,750 |
| Copper | $29,950–$59,650 | $31,850–$63,400 |
| Zinc | $27,950–$54,700 | $29,750–$58,150 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Janesville vs Kenosha
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Janesville | Kenosha |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,150–$16,100 | $8,700–$17,100 |
| 1,500 sq ft (15 squares) | $11,150–$23,000 | $11,850–$24,500 |
| 2,000 sq ft (20 squares) | $13,100–$29,950 | $13,950–$31,850 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $17,100–$38,150 |
| 3,000+ sq ft (30 squares) | $19,050–$41,850 | $20,250–$44,500 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Janesville vs Kenosha
Is metal roof installation cheaper in Janesville or Kenosha?
Janesville wins on price: metal roof installation runs about $21,550 there versus $22,900 in Kenosha, a gap of roughly $1,350 (6%) as of 2026.
Why does metal roof installation cost more in Kenosha than Janesville?
The main driver is local labor rates: Kenosha's labor index is 1.01 versus 0.95 in Janesville. Climate zone (cold vs cold) and permit fees also shift the total.
How much is metal roof installation in Janesville, WI?
Expect to pay $13,100 to $29,950 for metal roof installation in Janesville in 2026, averaging around $21,550.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Janesville and Kenosha: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $1,350 is a real gap, but it's a one-time cost you can partly offset in Kenosha with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik