Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Green Bay vs Janesville (2026)

The two metros aren't quite in sync on metal roof installation: Green Bay sits 1% below Janesville, or roughly $21,400 versus $21,550 — about $150 apart.

Green Bay WI

Lower cost
$13,050 $29,750

Typically around $21,400

Janesville WI

$13,100 $29,950

Typically around $21,550

Expect to pay roughly $150 (1%) more for metal roof installation in Janesville than in Green Bay — local labor is the main reason.
Side by side

Green Bay vs Janesville: full breakdown

FactorGreen BayJanesville
Typical 2026 cost$21,400$21,550
Estimated range$13,050–$29,750$13,100–$29,950
Labor index (vs US)×0.95×0.95
Climate zoneColdCold
Climate factor×1.04×1.04
Local permit$250$250
Labor share$12,850$12,950
Materials/equipment$8,550$8,600

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

The verdict

How much should this gap actually matter?

At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.

By type

Metal roof installation by type: Green Bay vs Janesville

Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeGreen BayJanesville
Corrugated steel (exposed fastener)$9,100$17,950$9,150$18,050
Standing-seam steel$17,950$34,700$18,050$34,900
Aluminum$14,000$27,800$14,100$27,950
Copper$29,750$59,300$29,950$59,650
Zinc$27,800$54,350$27,950$54,700

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Metal roof installation by roof size: Green Bay vs Janesville

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeGreen BayJanesville
1,000 sq ft (10 squares)$8,100$16,000$8,150$16,100
1,500 sq ft (15 squares)$11,050$22,900$11,150$23,000
2,000 sq ft (20 squares)$13,050$29,750$13,100$29,950
2,500 sq ft (25 squares)$16,000$35,650$16,100$35,900
3,000+ sq ft (30 squares)$18,950$41,550$19,050$41,850

All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.

Best time to buy

Cheapest time for metal roof installation in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

Our take

Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.

FAQ

Green Bay vs Janesville

Is metal roof installation cheaper in Green Bay or Janesville?

Green Bay comes out ahead here, at roughly $21,400 for metal roof installation compared with $21,550 in Janesville — a 1% ($150) gap as of 2026.

Why does metal roof installation cost more in Janesville than Green Bay?

The main driver is local labor rates: Janesville's labor index is 0.95 versus 0.95 in Green Bay. Climate zone (cold vs cold) also shift the total.

How much is metal roof installation in Green Bay, WI?

Green Bay homeowners can expect $13,050 to $29,750 for metal roof installation in 2026, with $21,400 the typical number.

When is the cheapest time to buy metal roof installation — and does it differ by city?

The best window is the same in both Green Bay and Janesville: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on metal roof installation cost?

Rarely. The $150 difference is real but one-time, and you can often close most of it in Janesville by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik