Metal Roof Installation cost: Irvington vs Paterson (2026)
There's essentially no price gap here: metal roof installation runs close to $24,850 in both Irvington and Paterson in 2026.
Irvington NJ
Typically around $24,850
Paterson NJ
Typically around $24,850
Irvington vs Paterson: full breakdown
| Factor | Irvington | Paterson |
|---|---|---|
| Typical 2026 cost | $24,850 | $24,850 |
| Estimated range | $15,150–$34,500 | $15,150–$34,500 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,900 | $14,900 |
| Materials/equipment | $9,950 | $9,950 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Irvington vs Paterson
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Irvington | Paterson |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,550–$20,800 | $10,550–$20,800 |
| Standing-seam steel | $20,800–$40,200 | $20,800–$40,200 |
| Aluminum | $16,250–$32,200 | $16,250–$32,200 |
| Copper | $34,500–$68,650 | $34,500–$68,650 |
| Zinc | $32,200–$62,950 | $32,200–$62,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Irvington vs Paterson
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Irvington | Paterson |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,450–$18,550 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $12,850–$26,500 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $15,150–$34,500 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $18,550–$41,300 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $21,950–$48,150 | $21,950–$48,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Irvington vs Paterson
Is metal roof installation cheaper in Irvington or Paterson?
Not really — both cities land at almost the same number for metal roof installation, around $24,850 each.
Why does metal roof installation cost more in Paterson than Irvington?
Paterson's higher labor index (1.14 vs 1.14 in Irvington) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Irvington, NJ?
In Irvington, metal roof installation typically runs $15,150–$34,500 in 2026, with most homeowners paying around $24,850.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $38.3/hr in the New York-Newark-Jersey City area versus $38.3/hr around New York-Newark-Jersey City (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Irvington and Paterson: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Irvington and Paterson cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik