Metal Roof Installation cost: Elizabeth vs Irvington (2026)
There's essentially no price gap here: metal roof installation runs close to $24,850 in both Elizabeth and Irvington in 2026.
Elizabeth NJ
Typically around $24,850
Irvington NJ
Typically around $24,850
Elizabeth vs Irvington: full breakdown
| Factor | Elizabeth | Irvington |
|---|---|---|
| Typical 2026 cost | $24,850 | $24,850 |
| Estimated range | $15,150–$34,500 | $15,150–$34,500 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,900 | $14,900 |
| Materials/equipment | $9,950 | $9,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
A wash — choose on quality, not city
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Elizabeth vs Irvington
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Elizabeth | Irvington |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,550–$20,800 | $10,550–$20,800 |
| Standing-seam steel | $20,800–$40,200 | $20,800–$40,200 |
| Aluminum | $16,250–$32,200 | $16,250–$32,200 |
| Copper | $34,500–$68,650 | $34,500–$68,650 |
| Zinc | $32,200–$62,950 | $32,200–$62,950 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Elizabeth vs Irvington
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Elizabeth | Irvington |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,450–$18,550 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $12,850–$26,500 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $15,150–$34,500 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $18,550–$41,300 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $21,950–$48,150 | $21,950–$48,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Elizabeth vs Irvington
Is metal roof installation cheaper in Elizabeth or Irvington?
Practically identical — expect around $24,850 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Irvington than Elizabeth?
The main driver is local labor rates: Irvington's labor index is 1.14 versus 1.14 in Elizabeth. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Elizabeth, NJ?
metal roof installation in Elizabeth runs $15,150–$34,500 as of 2026 — most jobs land near $24,850.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.3/hr around New York-Newark-Jersey City versus $38.3/hr near New York-Newark-Jersey City. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Elizabeth and Irvington: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Elizabeth and Irvington — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik