Metal Roof Installation cost: Hillsboro vs Medford (2026)
In 2026, metal roof installation is about 4% more expensive in Hillsboro than in Medford. Most homeowners pay around $23,400 in Hillsboro versus $22,600 in Medford — a gap of roughly $800.
Hillsboro OR
Typically around $23,400
Medford OR
Lower costTypically around $22,600
Hillsboro vs Medford: full breakdown
| Factor | Hillsboro | Medford |
|---|---|---|
| Typical 2026 cost | $23,400 | $22,600 |
| Estimated range | $14,250–$32,500 | $13,750–$31,400 |
| Labor index (vs US) | ×1.07 | ×1.04 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,050 | $13,550 |
| Materials/equipment | $9,350 | $9,050 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
How much should this gap actually matter?
A 4% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Hillsboro vs Medford
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Hillsboro | Medford |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,950–$19,600 | $9,600–$18,950 |
| Standing-seam steel | $19,600–$37,850 | $18,950–$36,550 |
| Aluminum | $15,300–$30,350 | $14,800–$29,300 |
| Copper | $32,500–$64,700 | $31,400–$62,450 |
| Zinc | $30,350–$59,350 | $29,300–$57,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Hillsboro vs Medford
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hillsboro | Medford |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,450 | $8,600–$16,900 |
| 1,500 sq ft (15 squares) | $12,100–$25,000 | $11,700–$24,150 |
| 2,000 sq ft (20 squares) | $14,250–$32,500 | $13,750–$31,400 |
| 2,500 sq ft (25 squares) | $17,450–$38,950 | $16,900–$37,600 |
| 3,000+ sq ft (30 squares) | $20,700–$45,350 | $20,000–$43,800 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
No BLS metro wage series for Medford; we use Oregon regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Hillsboro vs Medford
Is metal roof installation cheaper in Hillsboro or Medford?
Medford wins on price: metal roof installation runs about $22,600 there versus $23,400 in Hillsboro, a gap of roughly $800 (4%) as of 2026.
Why does metal roof installation cost more in Hillsboro than Medford?
Labor rates explain most of it — 1.07 in Hillsboro vs 1.04 in Medford. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Hillsboro, OR?
Expect to pay $14,250 to $32,500 for metal roof installation in Hillsboro in 2026, averaging around $23,400.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Hillsboro and Medford (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $800 is a real gap, but it's a one-time cost you can partly offset in Hillsboro with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik