Metal Roof Installation cost: Eugene vs Hillsboro (2026)
In 2026, metal roof installation is about 4% less expensive in Eugene than in Hillsboro. Most homeowners pay around $22,450 in Eugene versus $23,400 in Hillsboro — a gap of roughly $950.
Eugene OR
Lower costTypically around $22,450
Hillsboro OR
Typically around $23,400
Eugene vs Hillsboro: full breakdown
| Factor | Eugene | Hillsboro |
|---|---|---|
| Typical 2026 cost | $22,450 | $23,400 |
| Estimated range | $13,700–$31,200 | $14,250–$32,500 |
| Labor index (vs US) | ×1.03 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $13,450 | $14,050 |
| Materials/equipment | $9,000 | $9,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
A 4% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Eugene vs Hillsboro
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Eugene | Hillsboro |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,550–$18,850 | $9,950–$19,600 |
| Standing-seam steel | $18,850–$36,350 | $19,600–$37,850 |
| Aluminum | $14,700–$29,150 | $15,300–$30,350 |
| Copper | $31,200–$62,100 | $32,500–$64,700 |
| Zinc | $29,150–$56,950 | $30,350–$59,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Eugene vs Hillsboro
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Eugene | Hillsboro |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,550–$16,800 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $11,650–$24,000 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $13,700–$31,200 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $16,800–$37,400 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $19,850–$43,550 | $20,700–$45,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Eugene; we use Oregon regional price parity instead.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Eugene vs Hillsboro
Is metal roof installation cheaper in Eugene or Hillsboro?
Yes — Hillsboro costs more. Expect around $23,400 for metal roof installation there against $22,450 in Eugene, about $950 (4%) apart in 2026.
Why does metal roof installation cost more in Hillsboro than Eugene?
Labor rates explain most of it — 1.07 in Hillsboro vs 1.03 in Eugene. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Eugene, OR?
Expect to pay $13,700 to $31,200 for metal roof installation in Eugene in 2026, averaging around $22,450.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Eugene and Hillsboro: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Rarely. The $950 difference is real but one-time, and you can often close most of it in Hillsboro by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik