Metal Roof Installation cost: Hillsboro vs Lake Oswego (2026)
In 2026, Hillsboro and Lake Oswego land on nearly identical metal roof installation pricing — about $23,400 either way.
Hillsboro OR
Typically around $23,400
Lake Oswego OR
Typically around $23,400
Hillsboro vs Lake Oswego: full breakdown
| Factor | Hillsboro | Lake Oswego |
|---|---|---|
| Typical 2026 cost | $23,400 | $23,400 |
| Estimated range | $14,250–$32,500 | $14,250–$32,500 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,050 | $14,050 |
| Materials/equipment | $9,350 | $9,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Basically a tie — focus on the contractor
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Hillsboro vs Lake Oswego
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Hillsboro | Lake Oswego |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,950–$19,600 | $9,950–$19,600 |
| Standing-seam steel | $19,600–$37,850 | $19,600–$37,850 |
| Aluminum | $15,300–$30,350 | $15,300–$30,350 |
| Copper | $32,500–$64,700 | $32,500–$64,700 |
| Zinc | $30,350–$59,350 | $30,350–$59,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Hillsboro vs Lake Oswego
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hillsboro | Lake Oswego |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,450 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $12,100–$25,000 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $14,250–$32,500 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $17,450–$38,950 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $20,700–$45,350 | $20,700–$45,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Hillsboro vs Lake Oswego
Is metal roof installation cheaper in Hillsboro or Lake Oswego?
There's no meaningful difference: metal roof installation runs about $23,400 in both places.
Why does metal roof installation cost more in Lake Oswego than Hillsboro?
It comes down to labor: Lake Oswego indexes at 1.07 against Hillsboro's 1.07. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Hillsboro, OR?
In Hillsboro, metal roof installation typically runs $14,250–$32,500 in 2026, with most homeowners paying around $23,400.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $34.9/hr around Portland-Vancouver-Hillsboro versus $34.9/hr near Portland-Vancouver-Hillsboro. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Hillsboro and Lake Oswego: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Hillsboro and Lake Oswego — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik