Metal Roof Installation cost: Hillsboro vs Keizer (2026)
Hillsboro runs 4% higher than Keizer for metal roof installation — expect around $23,400 in Hillsboro against $22,450 in Keizer, a difference of about $950.
Hillsboro OR
Typically around $23,400
Keizer OR
Lower costTypically around $22,450
Hillsboro vs Keizer: full breakdown
| Factor | Hillsboro | Keizer |
|---|---|---|
| Typical 2026 cost | $23,400 | $22,450 |
| Estimated range | $14,250–$32,500 | $13,700–$31,200 |
| Labor index (vs US) | ×1.07 | ×1.03 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,050 | $13,450 |
| Materials/equipment | $9,350 | $9,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the price difference a dealbreaker?
A 4% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Hillsboro vs Keizer
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Hillsboro | Keizer |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,950–$19,600 | $9,550–$18,850 |
| Standing-seam steel | $19,600–$37,850 | $18,850–$36,350 |
| Aluminum | $15,300–$30,350 | $14,700–$29,150 |
| Copper | $32,500–$64,700 | $31,200–$62,100 |
| Zinc | $30,350–$59,350 | $29,150–$56,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Hillsboro vs Keizer
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hillsboro | Keizer |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,450 | $8,550–$16,800 |
| 1,500 sq ft (15 squares) | $12,100–$25,000 | $11,650–$24,000 |
| 2,000 sq ft (20 squares) | $14,250–$32,500 | $13,700–$31,200 |
| 2,500 sq ft (25 squares) | $17,450–$38,950 | $16,800–$37,400 |
| 3,000+ sq ft (30 squares) | $20,700–$45,350 | $19,850–$43,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
No BLS metro wage series for Keizer; we use Oregon regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Hillsboro vs Keizer
Is metal roof installation cheaper in Hillsboro or Keizer?
Keizer comes out ahead here, at roughly $22,450 for metal roof installation compared with $23,400 in Hillsboro — a 4% ($950) gap as of 2026.
Why does metal roof installation cost more in Hillsboro than Keizer?
It comes down to labor: Hillsboro indexes at 1.07 against Keizer's 1.03. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Hillsboro, OR?
Hillsboro homeowners can expect $14,250 to $32,500 for metal roof installation in 2026, with $23,400 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Hillsboro and Keizer: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Rarely. The $950 difference is real but one-time, and you can often close most of it in Hillsboro by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik