Metal Roof Installation cost: Fountainebleau vs Tampa (2026)
Fountainebleau runs 4% higher than Tampa for metal roof installation — expect around $21,500 in Fountainebleau against $20,600 in Tampa, a difference of about $900.
Fountainebleau FL
Typically around $21,500
Tampa FL
Lower costTypically around $20,600
Fountainebleau vs Tampa: full breakdown
| Factor | Fountainebleau | Tampa |
|---|---|---|
| Typical 2026 cost | $21,500 | $20,600 |
| Estimated range | $13,100–$29,850 | $12,550–$28,650 |
| Labor index (vs US) | ×0.96 | ×0.92 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $325 | $275 |
| Labor share | $12,900 | $12,350 |
| Materials/equipment | $8,600 | $8,250 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
4% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Fountainebleau vs Tampa
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Fountainebleau | Tampa |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,050 | $8,800–$17,300 |
| Standing-seam steel | $18,050–$34,750 | $17,300–$33,400 |
| Aluminum | $14,100–$27,900 | $13,500–$26,750 |
| Copper | $29,850–$59,400 | $28,650–$57,050 |
| Zinc | $27,900–$54,450 | $26,750–$52,300 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Fountainebleau vs Tampa
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Fountainebleau | Tampa |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,050 | $7,850–$15,400 |
| 1,500 sq ft (15 squares) | $11,150–$22,950 | $10,700–$22,050 |
| 2,000 sq ft (20 squares) | $13,100–$29,850 | $12,550–$28,650 |
| 2,500 sq ft (25 squares) | $16,050–$35,750 | $15,400–$34,350 |
| 3,000+ sq ft (30 squares) | $19,050–$41,650 | $18,250–$40,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Tampa-St. Petersburg-Clearwater metro · about 14% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Fountainebleau vs Tampa
Is metal roof installation cheaper in Fountainebleau or Tampa?
Tampa wins on price: metal roof installation runs about $20,600 there versus $21,500 in Fountainebleau, a gap of roughly $900 (4%) as of 2026.
Why does metal roof installation cost more in Fountainebleau than Tampa?
Fountainebleau's higher labor index (0.96 vs 0.92 in Tampa) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Fountainebleau, FL?
Expect to pay $13,100 to $29,850 for metal roof installation in Fountainebleau in 2026, averaging around $21,500.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $28.8/hr in Miami-Fort Lauderdale-West Palm Beach compared with $26.9/hr in Tampa-St. Petersburg-Clearwater (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Fountainebleau and Tampa: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not really — the $900 gap is one-time, and smart timing and tighter quotes in Fountainebleau can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik