Metal Roof Installation cost: Fountainebleau vs Jacksonville (2026)
Budget-wise, metal roof installation in Fountainebleau ($21,500) runs 1% more than in Jacksonville ($21,200), a roughly $300 spread.
Fountainebleau FL
Typically around $21,500
Jacksonville FL
Lower costTypically around $21,200
Fountainebleau vs Jacksonville: full breakdown
| Factor | Fountainebleau | Jacksonville |
|---|---|---|
| Typical 2026 cost | $21,500 | $21,200 |
| Estimated range | $13,100–$29,850 | $12,950–$29,450 |
| Labor index (vs US) | ×0.96 | ×0.94 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $325 | $275 |
| Labor share | $12,900 | $12,700 |
| Materials/equipment | $8,600 | $8,500 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Fountainebleau vs Jacksonville
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Fountainebleau | Jacksonville |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,050 | $9,050–$17,800 |
| Standing-seam steel | $18,050–$34,750 | $17,800–$34,350 |
| Aluminum | $14,100–$27,900 | $13,900–$27,500 |
| Copper | $29,850–$59,400 | $29,450–$58,650 |
| Zinc | $27,900–$54,450 | $27,500–$53,800 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Fountainebleau vs Jacksonville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Fountainebleau | Jacksonville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,050 | $8,050–$15,850 |
| 1,500 sq ft (15 squares) | $11,150–$22,950 | $11,000–$22,650 |
| 2,000 sq ft (20 squares) | $13,100–$29,850 | $12,950–$29,450 |
| 2,500 sq ft (25 squares) | $16,050–$35,750 | $15,850–$35,300 |
| 3,000+ sq ft (30 squares) | $19,050–$41,650 | $18,750–$41,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Jacksonville metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Fountainebleau vs Jacksonville
Is metal roof installation cheaper in Fountainebleau or Jacksonville?
Jacksonville comes out ahead here, at roughly $21,200 for metal roof installation compared with $21,500 in Fountainebleau — a 1% ($300) gap as of 2026.
Why does metal roof installation cost more in Fountainebleau than Jacksonville?
Fountainebleau's higher labor index (0.96 vs 0.94 in Jacksonville) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Fountainebleau, FL?
metal roof installation in Fountainebleau runs $13,100–$29,850 as of 2026 — most jobs land near $21,500.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $28.8/hr in the Miami-Fort Lauderdale-West Palm Beach area and $28.3/hr in Jacksonville. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Fountainebleau and Jacksonville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Not really — the $300 gap is one-time, and smart timing and tighter quotes in Fountainebleau can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik