Metal Roof Installation cost: Everett vs Spokane (2026)
The two metros aren't quite in sync on metal roof installation: Everett sits 17% above Spokane, or roughly $25,950 versus $22,200 — about $3,750 apart.
Everett WA
Typically around $25,950
Spokane WA
Lower costTypically around $22,200
Everett vs Spokane: full breakdown
| Factor | Everett | Spokane |
|---|---|---|
| Typical 2026 cost | $25,950 | $22,200 |
| Estimated range | $15,800–$36,050 | $13,550–$30,850 |
| Labor index (vs US) | ×1.19 | ×1.02 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $13,300 |
| Materials/equipment | $10,400 | $8,900 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
That's a real $3,750 difference (17%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Everett can narrow it.
Metal roof installation by type: Everett vs Spokane
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Everett | Spokane |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,450–$18,600 |
| Standing-seam steel | $21,750–$42,000 | $18,600–$35,950 |
| Aluminum | $17,000–$33,700 | $14,550–$28,800 |
| Copper | $36,050–$71,800 | $30,850–$61,400 |
| Zinc | $33,700–$65,850 | $28,800–$56,300 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Everett vs Spokane
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Everett | Spokane |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $11,500–$23,700 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $13,550–$30,850 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $16,600–$36,950 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $19,650–$43,050 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Spokane; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Everett vs Spokane
Is metal roof installation cheaper in Everett or Spokane?
Yes — Everett costs more. Expect around $25,950 for metal roof installation there against $22,200 in Spokane, about $3,750 (17%) apart in 2026.
Why does metal roof installation cost more in Everett than Spokane?
Everett's higher labor index (1.19 vs 1.02 in Spokane) is the biggest factor, with the mixed/mixed climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Everett, WA?
Expect to pay $15,800 to $36,050 for metal roof installation in Everett in 2026, averaging around $25,950.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Everett and Spokane: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $3,750 is a real gap, but it's a one-time cost you can partly offset in Everett with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik