Roofing · Everett, WA
How much does metal roof installation cost in Everett, WA? (2026)
In Everett, metal roof installation runs $15,800–$36,050, with most paying around $25,950 — about 21% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $25,950
- Typical cost
- $25,950
- Labor vs US
- +14%
- Climate
- Mixed
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Everett
- Priced about 21% above the national average, metal roof installation in Everett spans $15,800 to $36,050 — figure $25,950 for a standard job.
- Everett labor runs +14% versus the US average — the main reason the local price differs from the national figure.
- A Roofing permit in Everett runs about $325 — it's already folded into the estimate above.
- A well-installed job here typically lasts 40–70 years — plan the next replacement instead of waiting for an emergency one.
- Booking during Late spring to early fall (dry, 45–85°F) typically saves about 5–10% versus peak-season pricing.
What goes into the price in Everett
A typical Everett metal roof installation of $25,950 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Everett 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $6,200 – $14,300 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $9,275 – $21,425 |
| Permit & feesLocal building-department fee for Roofing work here. | $325 |
| Total installed cost | $15,800 – $36,050 |
Split from the Everett estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Everett
- Everett's labor rates sit about 14% higher than the national average (based on price levels for the Seattle-Tacoma-Bellevue metro area), pushing the price up.
- A Roofing permit in Everett costs around $325, included above.
Metal Roof Installation cost by roof size in Everett
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Everett 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,850 – $19,400 |
| 1,500 sq ft (15 squares) | $13,450 – $27,750 |
| 2,000 sq ft (20 squares) | $15,800 – $36,050 |
| 2,500 sq ft (25 squares) | $19,400 – $43,200 |
| 3,000+ sq ft (30 squares) | $22,950 – $50,350 |
National size ranges localized to Everett labor and climate.
Metal Roof Installation cost by type in Everett
| Corrugated steel (exposed fastener) | $11,050 – $21,750 |
| Standing-seam steel | $21,750 – $42,000 |
| Aluminum | $17,000 – $33,650 |
| Copper | $36,050 – $71,750 |
| Zinc | $33,650 – $65,800 |
Adjusted to Everett from national type-level ranges.
Metal Roof Installation cost by efficiency in Everett
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,850 – $21,750 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $15,800 – $36,050 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $30,100 – $59,900 |
Labor vs. materials in Everett
Install crew, removal, permit & startup — the part Everett rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $25,950 Everett project; your mix varies with scope.
Skilled installers in the Seattle-Tacoma-Bellevue area earn about $41.1/hr (32% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Everett labor adjustment | ×1.19 |
| mixed climate factor | ×1 |
| Local permit | +$325 |
| Everett estimate | $15,800 – $36,050 |
Promo prices vs. the real cost
Roofing promotions spike after bad weather, and so does the gap between advertised and actual cost. Confirm scope first:
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Labor, cleanup and permit
- Underlayment, fasteners and trim
- Tear-off of the old roof
What affects the cost
- Roof complexity and number of penetrations
- Whether existing roof can be overlaid
- Metal: steel, aluminum, copper or zinc
- Panel type (exposed-fastener vs standing seam)
Ways to save on metal roof installation in Everett
- Some insurers discount metal and impact-rated roofs
- Steel standing seam balances cost and longevity
- Metal's 40–70 yr life lowers lifetime cost
- Compare lifetime cost, not just the install price
How long does metal roof installation last in Everett?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Everett
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Everett?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Everett, WA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Everett, WA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $8,350–$14,300 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $9,500–$19,050 | $550/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $21,400–$38,100 | $550/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $23,800–$47,600 | $550/yr |
Per-square ranges are national installed benchmarks localized to Everett, WA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Everett
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why metal roof installation quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
Get an apples-to-apples bid
- Verify the contractor is licensed, insured and local, with recent references.
- Specify tear-off vs. overlay so all bids match.
- Compare the workmanship warranty, not just the material warranty.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Everett Roofing pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Everett
How much does metal roof installation cost in Everett, WA?
The low end sits near $15,800 and the high end near $36,050 for metal roof installation in Everett this 2026, with $25,950 the common middle. That's not a national average — it's adjusted for Everett labor rates, mixed-climate factors and permit fees.
Is metal roof installation more expensive in Everett than average?
Everett is about 21% higher than the national average, mainly because local labor runs at an index of 1.19 relative to the US average. and the local Roofing permit costs about $325.
Do I need a permit for metal roof installation in Everett?
The estimate above already covers the Roofing permit Everett generally requires for this job, so the $325 or so it costs won't land as a surprise.
What affects metal roof installation cost the most?
Start with the fundamentals — installing a metal roof — higher upfront cost, long lifespan and strong durability. Your mixed climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Everett using the BLS metro wage data labor index (×1.19 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Everett metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Everett
Homeowners in Everett often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Everett
Browse local 2026 costs for every home project in Everett, WA.