Metal Roof Installation cost: Edmonds vs Vancouver (2026)
Budget-wise, metal roof installation in Edmonds ($25,950) runs 11% more than in Vancouver ($23,400), a roughly $2,550 spread.
Edmonds WA
Typically around $25,950
Vancouver WA
Lower costTypically around $23,400
Edmonds vs Vancouver: full breakdown
| Factor | Edmonds | Vancouver |
|---|---|---|
| Typical 2026 cost | $25,950 | $23,400 |
| Estimated range | $15,800–$36,050 | $14,250–$32,500 |
| Labor index (vs US) | ×1.19 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $14,050 |
| Materials/equipment | $10,400 | $9,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
How much should this gap actually matter?
A 11% spread (roughly $2,550) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Edmonds typically recover some of it.
Metal roof installation by type: Edmonds vs Vancouver
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Edmonds | Vancouver |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,950–$19,600 |
| Standing-seam steel | $21,750–$42,000 | $19,600–$37,850 |
| Aluminum | $17,000–$33,700 | $15,300–$30,350 |
| Copper | $36,050–$71,800 | $32,500–$64,700 |
| Zinc | $33,700–$65,850 | $30,350–$59,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Edmonds vs Vancouver
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Edmonds | Vancouver |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $20,700–$45,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Edmonds vs Vancouver
Is metal roof installation cheaper in Edmonds or Vancouver?
In 2026, metal roof installation is cheaper in Vancouver at about $23,400, versus $25,950 in Edmonds — a difference of about $2,550 (11%).
Why does metal roof installation cost more in Edmonds than Vancouver?
Labor rates explain most of it — 1.19 in Edmonds vs 1.07 in Vancouver. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Edmonds, WA?
metal roof installation in Edmonds runs $15,800–$36,050 as of 2026 — most jobs land near $25,950.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $41.1/hr in the Seattle-Tacoma-Bellevue area and $34.9/hr in Portland-Vancouver-Hillsboro. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Edmonds and Vancouver: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,550 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Edmonds can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik