Metal Roof Installation cost: Edmonds vs Spokane (2026)
Budget-wise, metal roof installation in Edmonds ($25,950) runs 17% more than in Spokane ($22,200), a roughly $3,750 spread.
Edmonds WA
Typically around $25,950
Spokane WA
Lower costTypically around $22,200
Edmonds vs Spokane: full breakdown
| Factor | Edmonds | Spokane |
|---|---|---|
| Typical 2026 cost | $25,950 | $22,200 |
| Estimated range | $15,800–$36,050 | $13,550–$30,850 |
| Labor index (vs US) | ×1.19 | ×1.02 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $13,300 |
| Materials/equipment | $10,400 | $8,900 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the gap worth worrying about?
17% (about $3,750) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Edmonds can close much of that gap.
Metal roof installation by type: Edmonds vs Spokane
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Edmonds | Spokane |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,450–$18,600 |
| Standing-seam steel | $21,750–$42,000 | $18,600–$35,950 |
| Aluminum | $17,000–$33,700 | $14,550–$28,800 |
| Copper | $36,050–$71,800 | $30,850–$61,400 |
| Zinc | $33,700–$65,850 | $28,800–$56,300 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Edmonds vs Spokane
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Edmonds | Spokane |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $11,500–$23,700 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $13,550–$30,850 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $16,600–$36,950 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $19,650–$43,050 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Spokane; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Edmonds vs Spokane
Is metal roof installation cheaper in Edmonds or Spokane?
Yes — Edmonds costs more. Expect around $25,950 for metal roof installation there against $22,200 in Spokane, about $3,750 (17%) apart in 2026.
Why does metal roof installation cost more in Edmonds than Spokane?
Labor rates explain most of it — 1.19 in Edmonds vs 1.02 in Spokane. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Edmonds, WA?
In Edmonds, metal roof installation typically runs $15,800–$36,050 in 2026, with most homeowners paying around $25,950.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Edmonds and Spokane (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $3,750 gap is one-time, and smart timing and tighter quotes in Edmonds can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik