Metal Roof Installation cost: Eden Prairie vs Rochester (2026)
The two metros aren't quite in sync on metal roof installation: Eden Prairie sits 16% above Rochester, or roughly $25,050 versus $21,550 — about $3,500 apart.
Eden Prairie MN
Typically around $25,050
Rochester MN
Lower costTypically around $21,550
Eden Prairie vs Rochester: full breakdown
| Factor | Eden Prairie | Rochester |
|---|---|---|
| Typical 2026 cost | $25,050 | $21,550 |
| Estimated range | $15,250–$34,850 | $13,100–$29,950 |
| Labor index (vs US) | ×1.11 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,050 | $12,950 |
| Materials/equipment | $10,000 | $8,600 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
That's a real $3,500 difference (16%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Eden Prairie can narrow it.
Metal roof installation by type: Eden Prairie vs Rochester
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Eden Prairie | Rochester |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $9,150–$18,050 |
| Standing-seam steel | $21,000–$40,600 | $18,050–$34,900 |
| Aluminum | $16,400–$32,550 | $14,100–$27,950 |
| Copper | $34,850–$69,350 | $29,950–$59,650 |
| Zinc | $32,550–$63,600 | $27,950–$54,700 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Eden Prairie vs Rochester
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Eden Prairie | Rochester |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $8,150–$16,100 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $11,150–$23,000 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $13,100–$29,950 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $16,100–$35,900 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $19,050–$41,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Rochester; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Eden Prairie vs Rochester
Is metal roof installation cheaper in Eden Prairie or Rochester?
In 2026, metal roof installation is cheaper in Rochester at about $21,550, versus $25,050 in Eden Prairie — a difference of about $3,500 (16%).
Why does metal roof installation cost more in Eden Prairie than Rochester?
It comes down to labor: Eden Prairie indexes at 1.11 against Rochester's 0.95. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Eden Prairie, MN?
Expect to pay $15,250 to $34,850 for metal roof installation in Eden Prairie in 2026, averaging around $25,050.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Eden Prairie and Rochester: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $3,500 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Eden Prairie can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik