Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Davenport vs Sioux City (2026)

The two metros aren't quite in sync on metal roof installation: Davenport sits 1% above Sioux City, or roughly $21,150 versus $21,000 — about $150 apart.

Davenport IA

$12,900 $29,400

Typically around $21,150

Sioux City IA

Lower cost
$12,800 $29,200

Typically around $21,000

metal roof installation runs about $150 (1%) more in Davenport than in Sioux City, driven mostly by local labor rates.
Side by side

Davenport vs Sioux City: full breakdown

FactorDavenportSioux City
Typical 2026 cost$21,150$21,000
Estimated range$12,900–$29,400$12,800–$29,200
Labor index (vs US)×0.93×0.93
Climate zoneColdCold
Climate factor×1.04×1.04
Local permit$250$250
Labor share$12,700$12,600
Materials/equipment$8,450$8,400

All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.

The verdict

Is the price difference a dealbreaker?

That 1% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Metal roof installation by type: Davenport vs Sioux City

Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeDavenportSioux City
Corrugated steel (exposed fastener)$9,000$17,750$8,950$17,600
Standing-seam steel$17,750$34,250$17,600$34,050
Aluminum$13,850$27,450$13,750$27,250
Copper$29,400$58,550$29,200$58,150
Zinc$27,450$53,650$27,250$53,350

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

By size

Metal roof installation by roof size: Davenport vs Sioux City

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeDavenportSioux City
1,000 sq ft (10 squares)$8,000$15,800$7,950$15,700
1,500 sq ft (15 squares)$10,950$22,600$10,850$22,450
2,000 sq ft (20 squares)$12,900$29,400$12,800$29,200
2,500 sq ft (25 squares)$15,800$35,200$15,700$35,000
3,000+ sq ft (30 squares)$18,700$41,050$18,600$40,800

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

Best time to buy

Cheapest time for metal roof installation in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Davenport vs Sioux City

Is metal roof installation cheaper in Davenport or Sioux City?

Yes — Davenport costs more. Expect around $21,150 for metal roof installation there against $21,000 in Sioux City, about $150 (1%) apart in 2026.

Why does metal roof installation cost more in Davenport than Sioux City?

Labor rates explain most of it — 0.93 in Davenport vs 0.93 in Sioux City. A cold climate versus cold accounts for the rest.

How much is metal roof installation in Davenport, IA?

In Davenport, metal roof installation typically runs $12,900–$29,400 in 2026, with most homeowners paying around $21,150.

When is the cheapest time to buy metal roof installation — and does it differ by city?

The best window is the same in both Davenport and Sioux City: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on metal roof installation cost?

Probably not. Yes, $150 is a real gap, but it's a one-time cost you can partly offset in Davenport with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik