Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Cedar Rapids vs Davenport (2026)

Budget-wise, metal roof installation in Cedar Rapids ($21,300) runs 1% more than in Davenport ($21,150), a roughly $150 spread.

Cedar Rapids IA

$12,950 $29,600

Typically around $21,300

Davenport IA

Lower cost
$12,900 $29,400

Typically around $21,150

Cedar Rapids costs about $150 (1%) more than Davenport for metal roof installation, largely because of the local labor rate gap.
Side by side

Cedar Rapids vs Davenport: full breakdown

FactorCedar RapidsDavenport
Typical 2026 cost$21,300$21,150
Estimated range$12,950–$29,600$12,900–$29,400
Labor index (vs US)×0.94×0.93
Climate zoneColdCold
Climate factor×1.04×1.04
Local permit$250$250
Labor share$12,800$12,700
Materials/equipment$8,500$8,450

All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.

The verdict

How much should this gap actually matter?

At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.

By type

Metal roof installation by type: Cedar Rapids vs Davenport

Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeCedar RapidsDavenport
Corrugated steel (exposed fastener)$9,050$17,850$9,000$17,750
Standing-seam steel$17,850$34,450$17,750$34,250
Aluminum$13,950$27,600$13,850$27,450
Copper$29,600$58,900$29,400$58,550
Zinc$27,600$54,000$27,450$53,650

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

By size

Metal roof installation by roof size: Cedar Rapids vs Davenport

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeCedar RapidsDavenport
1,000 sq ft (10 squares)$8,050$15,900$8,000$15,800
1,500 sq ft (15 squares)$11,000$22,750$10,950$22,600
2,000 sq ft (20 squares)$12,950$29,600$12,900$29,400
2,500 sq ft (25 squares)$15,900$35,450$15,800$35,200
3,000+ sq ft (30 squares)$18,800$41,300$18,700$41,050

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Best time to buy

Cheapest time for metal roof installation in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

Our take

The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.

FAQ

Cedar Rapids vs Davenport

Is metal roof installation cheaper in Cedar Rapids or Davenport?

In 2026, metal roof installation is cheaper in Davenport at about $21,150, versus $21,300 in Cedar Rapids — a difference of about $150 (1%).

Why does metal roof installation cost more in Cedar Rapids than Davenport?

The main driver is local labor rates: Cedar Rapids's labor index is 0.94 versus 0.93 in Davenport. Climate zone (cold vs cold) also shift the total.

How much is metal roof installation in Cedar Rapids, IA?

Expect to pay $12,950 to $29,600 for metal roof installation in Cedar Rapids in 2026, averaging around $21,300.

When is the cheapest time to buy metal roof installation — and does it differ by city?

The best window is the same in both Cedar Rapids and Davenport: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on metal roof installation cost?

That would be a stretch. $150 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Cedar Rapids can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik