Metal Roof Installation cost: Dallas vs Garland (2026)
Dallas and Garland are a near-perfect match on metal roof installation cost in 2026, both landing around $21,850.
Dallas TX
Typically around $21,850
Garland TX
Typically around $21,850
Dallas vs Garland: full breakdown
| Factor | Dallas | Garland |
|---|---|---|
| Typical 2026 cost | $21,850 | $21,850 |
| Estimated range | $13,300–$30,350 | $13,300–$30,350 |
| Labor index (vs US) | ×0.97 | ×0.97 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $13,100 | $13,100 |
| Materials/equipment | $8,750 | $8,750 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Dallas vs Garland
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Dallas | Garland |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,300–$18,300 | $9,300–$18,300 |
| Standing-seam steel | $18,300–$35,350 | $18,300–$35,350 |
| Aluminum | $14,300–$28,350 | $14,300–$28,350 |
| Copper | $30,350–$60,350 | $30,350–$60,350 |
| Zinc | $28,350–$55,350 | $28,350–$55,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Dallas vs Garland
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Dallas | Garland |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,300 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $11,300–$23,300 | $11,300–$23,300 |
| 2,000 sq ft (20 squares) | $13,300–$30,350 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $16,300–$36,350 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $19,300–$42,350 | $19,300–$42,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Dallas vs Garland
Is metal roof installation cheaper in Dallas or Garland?
Practically identical — expect around $21,850 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Garland than Dallas?
It comes down to labor: Garland indexes at 0.97 against Dallas's 0.97. The hot-vs-hot climate difference adds to the gap.
How much is metal roof installation in Dallas, TX?
metal roof installation in Dallas runs $13,300–$30,350 as of 2026 — most jobs land near $21,850.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $29.7/hr in Dallas-Fort Worth-Arlington compared with $29.7/hr in Dallas-Fort Worth-Arlington (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Dallas and Garland: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Dallas and Garland — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik