Metal Roof Installation cost: Colorado Springs vs Lakewood (2026)
In 2026, metal roof installation is about 11% less expensive in Colorado Springs than in Lakewood. Most homeowners pay around $22,250 in Colorado Springs versus $24,650 in Lakewood — a gap of roughly $2,400.
Colorado Springs CO
Lower costTypically around $22,250
Lakewood CO
Typically around $24,650
Colorado Springs vs Lakewood: full breakdown
| Factor | Colorado Springs | Lakewood |
|---|---|---|
| Typical 2026 cost | $22,250 | $24,650 |
| Estimated range | $13,550–$30,900 | $15,000–$34,250 |
| Labor index (vs US) | ×0.98 | ×1.09 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $300 |
| Labor share | $13,350 | $14,800 |
| Materials/equipment | $8,900 | $9,850 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
That's a real $2,400 difference (11%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Lakewood can narrow it.
Metal roof installation by type: Colorado Springs vs Lakewood
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Colorado Springs | Lakewood |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,450–$18,650 | $10,500–$20,650 |
| Standing-seam steel | $18,650–$36,000 | $20,650–$39,900 |
| Aluminum | $14,550–$28,850 | $16,150–$32,000 |
| Copper | $30,900–$61,550 | $34,250–$68,200 |
| Zinc | $28,850–$56,450 | $32,000–$62,550 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Colorado Springs vs Lakewood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Colorado Springs | Lakewood |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,450–$16,600 | $9,350–$18,400 |
| 1,500 sq ft (15 squares) | $11,500–$23,750 | $12,750–$26,350 |
| 2,000 sq ft (20 squares) | $13,550–$30,900 | $15,000–$34,250 |
| 2,500 sq ft (25 squares) | $16,600–$37,050 | $18,400–$41,050 |
| 3,000+ sq ft (30 squares) | $19,700–$43,150 | $21,800–$47,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Colorado Springs; we use Colorado regional price parity instead.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Colorado Springs vs Lakewood
Is metal roof installation cheaper in Colorado Springs or Lakewood?
Colorado Springs wins on price: metal roof installation runs about $22,250 there versus $24,650 in Lakewood, a gap of roughly $2,400 (11%) as of 2026.
Why does metal roof installation cost more in Lakewood than Colorado Springs?
The main driver is local labor rates: Lakewood's labor index is 1.09 versus 0.98 in Colorado Springs. Climate zone (cold vs cold) and permit fees also shift the total.
How much is metal roof installation in Colorado Springs, CO?
Expect to pay $13,550 to $30,900 for metal roof installation in Colorado Springs in 2026, averaging around $22,250.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Colorado Springs and Lakewood: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,400 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Lakewood can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik