Metal Roof Installation cost: Burlington vs Yonkers (2026)
Budget-wise, metal roof installation in Burlington ($23,450) runs 10% less than in Yonkers ($25,800), a roughly $2,350 spread.
Burlington VT
Lower costTypically around $23,450
Yonkers NY
Typically around $25,800
Burlington vs Yonkers: full breakdown
| Factor | Burlington | Yonkers |
|---|---|---|
| Typical 2026 cost | $23,450 | $25,800 |
| Estimated range | $14,300–$32,600 | $15,700–$35,850 |
| Labor index (vs US) | ×1.04 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $325 |
| Labor share | $14,050 | $15,500 |
| Materials/equipment | $9,400 | $10,300 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the price difference a dealbreaker?
10% (about $2,350) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Yonkers can close much of that gap.
Metal roof installation by type: Burlington vs Yonkers
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Burlington | Yonkers |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,000–$19,700 | $11,000–$21,650 |
| Standing-seam steel | $19,700–$38,000 | $21,650–$41,750 |
| Aluminum | $15,400–$30,450 | $16,900–$33,500 |
| Copper | $32,600–$64,950 | $35,850–$71,350 |
| Zinc | $30,450–$59,550 | $33,500–$65,450 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Burlington vs Yonkers
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Burlington | Yonkers |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,550 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $12,150–$25,100 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $14,300–$32,600 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $17,550–$39,100 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $20,750–$45,550 | $22,800–$50,050 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
No BLS metro wage series for Burlington; we use Vermont regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Burlington vs Yonkers
Is metal roof installation cheaper in Burlington or Yonkers?
In 2026, metal roof installation is cheaper in Burlington at about $23,450, versus $25,800 in Yonkers — a difference of about $2,350 (10%).
Why does metal roof installation cost more in Yonkers than Burlington?
Labor rates explain most of it — 1.14 in Yonkers vs 1.04 in Burlington. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Burlington, VT?
In Burlington, metal roof installation typically runs $14,300–$32,600 in 2026, with most homeowners paying around $23,450.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Burlington and Yonkers: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not really — the $2,350 gap is one-time, and smart timing and tighter quotes in Yonkers can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik