Metal Roof Installation cost: Burlington vs Syracuse (2026)
Burlington runs 7% higher than Syracuse for metal roof installation — expect around $23,450 in Burlington against $21,850 in Syracuse, a difference of about $1,600.
Burlington VT
Typically around $23,450
Syracuse NY
Lower costTypically around $21,850
Burlington vs Syracuse: full breakdown
| Factor | Burlington | Syracuse |
|---|---|---|
| Typical 2026 cost | $23,450 | $21,850 |
| Estimated range | $14,300–$32,600 | $13,300–$30,350 |
| Labor index (vs US) | ×1.04 | ×0.96 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $275 |
| Labor share | $14,050 | $13,100 |
| Materials/equipment | $9,400 | $8,750 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
That 7% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Burlington vs Syracuse
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Burlington | Syracuse |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,000–$19,700 | $9,300–$18,300 |
| Standing-seam steel | $19,700–$38,000 | $18,300–$35,350 |
| Aluminum | $15,400–$30,450 | $14,300–$28,350 |
| Copper | $32,600–$64,950 | $30,350–$60,450 |
| Zinc | $30,450–$59,550 | $28,350–$55,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Burlington vs Syracuse
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Burlington | Syracuse |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,550 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $12,150–$25,100 | $11,300–$23,350 |
| 2,000 sq ft (20 squares) | $14,300–$32,600 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $17,550–$39,100 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $20,750–$45,550 | $19,300–$42,400 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Burlington vs Syracuse
Is metal roof installation cheaper in Burlington or Syracuse?
Syracuse wins on price: metal roof installation runs about $21,850 there versus $23,450 in Burlington, a gap of roughly $1,600 (7%) as of 2026.
Why does metal roof installation cost more in Burlington than Syracuse?
It comes down to labor: Burlington indexes at 1.04 against Syracuse's 0.96. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Burlington, VT?
metal roof installation in Burlington runs $14,300–$32,600 as of 2026 — most jobs land near $23,450.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Burlington and Syracuse, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $1,600 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Burlington can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik