Metal Roof Installation cost: Brookfield vs Kenosha (2026)
Brookfield runs 4% higher than Kenosha for metal roof installation — expect around $23,800 in Brookfield against $22,900 in Kenosha, a difference of about $900.
Brookfield WI
Typically around $23,800
Kenosha WI
Lower costTypically around $22,900
Brookfield vs Kenosha: full breakdown
| Factor | Brookfield | Kenosha |
|---|---|---|
| Typical 2026 cost | $23,800 | $22,900 |
| Estimated range | $14,500–$33,050 | $13,950–$31,850 |
| Labor index (vs US) | ×1.05 | ×1.01 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $275 |
| Labor share | $14,300 | $13,750 |
| Materials/equipment | $9,500 | $9,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
That 4% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Brookfield vs Kenosha
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Brookfield | Kenosha |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,100–$19,950 | $9,750–$19,200 |
| Standing-seam steel | $19,950–$38,500 | $19,200–$37,100 |
| Aluminum | $15,550–$30,850 | $15,000–$29,750 |
| Copper | $33,050–$65,800 | $31,850–$63,400 |
| Zinc | $30,850–$60,350 | $29,750–$58,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Brookfield vs Kenosha
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brookfield | Kenosha |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,000–$17,750 | $8,700–$17,100 |
| 1,500 sq ft (15 squares) | $12,300–$25,400 | $11,850–$24,500 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $13,950–$31,850 |
| 2,500 sq ft (25 squares) | $17,750–$39,600 | $17,100–$38,150 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $20,250–$44,500 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Milwaukee-Waukesha metro · about 8% above the US average installer wage.
No BLS metro wage series for Kenosha; we use Wisconsin regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Brookfield vs Kenosha
Is metal roof installation cheaper in Brookfield or Kenosha?
Kenosha comes out ahead here, at roughly $22,900 for metal roof installation compared with $23,800 in Brookfield — a 4% ($900) gap as of 2026.
Why does metal roof installation cost more in Brookfield than Kenosha?
It comes down to labor: Brookfield indexes at 1.05 against Kenosha's 1.01. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Brookfield, WI?
In Brookfield, metal roof installation typically runs $14,500–$33,050 in 2026, with most homeowners paying around $23,800.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Brookfield and Kenosha (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $900 difference is real but one-time, and you can often close most of it in Brookfield by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik