Metal Roof Installation cost: Brookfield vs Green Bay (2026)
Budget-wise, metal roof installation in Brookfield ($23,800) runs 11% more than in Green Bay ($21,400), a roughly $2,400 spread.
Brookfield WI
Typically around $23,800
Green Bay WI
Lower costTypically around $21,400
Brookfield vs Green Bay: full breakdown
| Factor | Brookfield | Green Bay |
|---|---|---|
| Typical 2026 cost | $23,800 | $21,400 |
| Estimated range | $14,500–$33,050 | $13,050–$29,750 |
| Labor index (vs US) | ×1.05 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $250 |
| Labor share | $14,300 | $12,850 |
| Materials/equipment | $9,500 | $8,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the price difference a dealbreaker?
11% (about $2,400) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Brookfield can close much of that gap.
Metal roof installation by type: Brookfield vs Green Bay
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Brookfield | Green Bay |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,100–$19,950 | $9,100–$17,950 |
| Standing-seam steel | $19,950–$38,500 | $17,950–$34,700 |
| Aluminum | $15,550–$30,850 | $14,000–$27,800 |
| Copper | $33,050–$65,800 | $29,750–$59,300 |
| Zinc | $30,850–$60,350 | $27,800–$54,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Brookfield vs Green Bay
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brookfield | Green Bay |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,000–$17,750 | $8,100–$16,000 |
| 1,500 sq ft (15 squares) | $12,300–$25,400 | $11,050–$22,900 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $13,050–$29,750 |
| 2,500 sq ft (25 squares) | $17,750–$39,600 | $16,000–$35,650 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $18,950–$41,550 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Milwaukee-Waukesha metro · about 8% above the US average installer wage.
No BLS metro wage series for Green Bay; we use Wisconsin regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Brookfield vs Green Bay
Is metal roof installation cheaper in Brookfield or Green Bay?
In 2026, metal roof installation is cheaper in Green Bay at about $21,400, versus $23,800 in Brookfield — a difference of about $2,400 (11%).
Why does metal roof installation cost more in Brookfield than Green Bay?
The main driver is local labor rates: Brookfield's labor index is 1.05 versus 0.95 in Green Bay. Climate zone (cold vs cold) and permit fees also shift the total.
How much is metal roof installation in Brookfield, WI?
In Brookfield, metal roof installation typically runs $14,500–$33,050 in 2026, with most homeowners paying around $23,800.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Brookfield and Green Bay, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not really — the $2,400 gap is one-time, and smart timing and tighter quotes in Brookfield can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik