Metal Roof Installation cost: Brick vs Paterson (2026)
Budget-wise, metal roof installation in Brick ($21,900) runs 13% less than in Paterson ($24,850), a roughly $2,950 spread.
Brick NJ
Lower costTypically around $21,900
Paterson NJ
Typically around $24,850
Brick vs Paterson: full breakdown
| Factor | Brick | Paterson |
|---|---|---|
| Typical 2026 cost | $21,900 | $24,850 |
| Estimated range | $13,350–$30,450 | $15,150–$34,500 |
| Labor index (vs US) | ×1.01 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,150 | $14,900 |
| Materials/equipment | $8,750 | $9,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
How much should this gap actually matter?
13% (about $2,950) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Paterson can close much of that gap.
Metal roof installation by type: Brick vs Paterson
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Brick | Paterson |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,350–$18,400 | $10,550–$20,800 |
| Standing-seam steel | $18,400–$35,500 | $20,800–$40,200 |
| Aluminum | $14,350–$28,450 | $16,250–$32,200 |
| Copper | $30,450–$60,650 | $34,500–$68,650 |
| Zinc | $28,450–$55,600 | $32,200–$62,950 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Brick vs Paterson
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brick | Paterson |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,350 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,350–$23,400 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,350–$30,450 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,350–$36,500 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $19,400–$42,550 | $21,950–$48,150 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
No BLS metro wage series for Brick; we use New Jersey regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Brick vs Paterson
Is metal roof installation cheaper in Brick or Paterson?
Yes — Paterson costs more. Expect around $24,850 for metal roof installation there against $21,900 in Brick, about $2,950 (13%) apart in 2026.
Why does metal roof installation cost more in Paterson than Brick?
Labor rates explain most of it — 1.14 in Paterson vs 1.01 in Brick. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Brick, NJ?
Expect to pay $13,350 to $30,450 for metal roof installation in Brick in 2026, averaging around $21,900.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Brick and Paterson: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Rarely. The $2,950 difference is real but one-time, and you can often close most of it in Paterson by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik