Metal Roof Installation cost: Brick vs Newark (2026)
Brick runs 13% lower than Newark for metal roof installation — expect around $21,900 in Brick against $24,850 in Newark, a difference of about $2,950.
Brick NJ
Lower costTypically around $21,900
Newark NJ
Typically around $24,850
Brick vs Newark: full breakdown
| Factor | Brick | Newark |
|---|---|---|
| Typical 2026 cost | $21,900 | $24,850 |
| Estimated range | $13,350–$30,450 | $15,150–$34,500 |
| Labor index (vs US) | ×1.01 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,150 | $14,900 |
| Materials/equipment | $8,750 | $9,950 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
A 13% spread (roughly $2,950) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Newark typically recover some of it.
Metal roof installation by type: Brick vs Newark
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Brick | Newark |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,350–$18,400 | $10,550–$20,800 |
| Standing-seam steel | $18,400–$35,500 | $20,800–$40,200 |
| Aluminum | $14,350–$28,450 | $16,250–$32,200 |
| Copper | $30,450–$60,650 | $34,500–$68,650 |
| Zinc | $28,450–$55,600 | $32,200–$62,950 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Brick vs Newark
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brick | Newark |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,350 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,350–$23,400 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,350–$30,450 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,350–$36,500 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $19,400–$42,550 | $21,950–$48,150 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Brick; we use New Jersey regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Brick vs Newark
Is metal roof installation cheaper in Brick or Newark?
Brick comes out ahead here, at roughly $21,900 for metal roof installation compared with $24,850 in Newark — a 13% ($2,950) gap as of 2026.
Why does metal roof installation cost more in Newark than Brick?
Labor rates explain most of it — 1.14 in Newark vs 1.01 in Brick. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Brick, NJ?
In Brick, metal roof installation typically runs $13,350–$30,450 in 2026, with most homeowners paying around $21,900.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Brick and Newark: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,950 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Newark can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik