Metal Roof Installation cost: Binghamton vs Yonkers (2026)
Budget-wise, metal roof installation in Binghamton ($21,550) runs 20% less than in Yonkers ($25,800), a roughly $4,250 spread.
Binghamton NY
Lower costTypically around $21,550
Yonkers NY
Typically around $25,800
Binghamton vs Yonkers: full breakdown
| Factor | Binghamton | Yonkers |
|---|---|---|
| Typical 2026 cost | $21,550 | $25,800 |
| Estimated range | $13,100–$29,950 | $15,700–$35,850 |
| Labor index (vs US) | ×0.95 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $325 |
| Labor share | $12,950 | $15,500 |
| Materials/equipment | $8,600 | $10,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
How much should this gap actually matter?
A 20% spread (roughly $4,250) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Yonkers typically recover some of it.
Metal roof installation by type: Binghamton vs Yonkers
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Binghamton | Yonkers |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,150–$18,050 | $11,000–$21,650 |
| Standing-seam steel | $18,050–$34,900 | $21,650–$41,750 |
| Aluminum | $14,100–$27,950 | $16,900–$33,500 |
| Copper | $29,950–$59,650 | $35,850–$71,350 |
| Zinc | $27,950–$54,700 | $33,500–$65,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Binghamton vs Yonkers
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Binghamton | Yonkers |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,150–$16,100 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $11,150–$23,000 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $13,100–$29,950 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $19,050–$41,850 | $22,800–$50,050 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
No BLS metro wage series for Binghamton; we use New York regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Binghamton vs Yonkers
Is metal roof installation cheaper in Binghamton or Yonkers?
Yes — Yonkers costs more. Expect around $25,800 for metal roof installation there against $21,550 in Binghamton, about $4,250 (20%) apart in 2026.
Why does metal roof installation cost more in Yonkers than Binghamton?
It comes down to labor: Yonkers indexes at 1.14 against Binghamton's 0.95. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Binghamton, NY?
metal roof installation in Binghamton runs $13,100–$29,950 as of 2026 — most jobs land near $21,550.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Binghamton and Yonkers (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $4,250 difference is real but one-time, and you can often close most of it in Yonkers by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik