Metal Roof Installation cost: Binghamton vs Syracuse (2026)
The two metros aren't quite in sync on metal roof installation: Binghamton sits 1% below Syracuse, or roughly $21,550 versus $21,850 — about $300 apart.
Binghamton NY
Lower costTypically around $21,550
Syracuse NY
Typically around $21,850
Binghamton vs Syracuse: full breakdown
| Factor | Binghamton | Syracuse |
|---|---|---|
| Typical 2026 cost | $21,550 | $21,850 |
| Estimated range | $13,100–$29,950 | $13,300–$30,350 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $275 |
| Labor share | $12,950 | $13,100 |
| Materials/equipment | $8,600 | $8,750 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the price difference a dealbreaker?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Binghamton vs Syracuse
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Binghamton | Syracuse |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,150–$18,050 | $9,300–$18,300 |
| Standing-seam steel | $18,050–$34,900 | $18,300–$35,350 |
| Aluminum | $14,100–$27,950 | $14,300–$28,350 |
| Copper | $29,950–$59,650 | $30,350–$60,450 |
| Zinc | $27,950–$54,700 | $28,350–$55,400 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Binghamton vs Syracuse
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Binghamton | Syracuse |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,150–$16,100 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $11,150–$23,000 | $11,300–$23,350 |
| 2,000 sq ft (20 squares) | $13,100–$29,950 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $19,050–$41,850 | $19,300–$42,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Binghamton vs Syracuse
Is metal roof installation cheaper in Binghamton or Syracuse?
In 2026, metal roof installation is cheaper in Binghamton at about $21,550, versus $21,850 in Syracuse — a difference of about $300 (1%).
Why does metal roof installation cost more in Syracuse than Binghamton?
It comes down to labor: Syracuse indexes at 0.96 against Binghamton's 0.95. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Binghamton, NY?
In Binghamton, metal roof installation typically runs $13,100–$29,950 in 2026, with most homeowners paying around $21,550.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Binghamton and Syracuse, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not really — the $300 gap is one-time, and smart timing and tighter quotes in Syracuse can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik