Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Biloxi vs Jackson (2026)

The two metros aren't quite in sync on metal roof installation: Biloxi sits 1% below Jackson, or roughly $20,950 versus $21,100 — about $150 apart.

Biloxi MS

Lower cost
$12,750 $29,100

Typically around $20,950

Jackson MS

$12,850 $29,300

Typically around $21,100

Expect to pay roughly $150 (1%) more for metal roof installation in Jackson than in Biloxi — local labor is the main reason.
Side by side

Biloxi vs Jackson: full breakdown

FactorBiloxiJackson
Typical 2026 cost$20,950$21,100
Estimated range$12,750–$29,100$12,850–$29,300
Labor index (vs US)×0.93×0.94
Climate zoneHotHot
Climate factor×1.03×1.03
Local permit$250$250
Labor share$12,550$12,650
Materials/equipment$8,400$8,450

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

The verdict

Is the price difference a dealbreaker?

At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.

By type

Metal roof installation by type: Biloxi vs Jackson

We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeBiloxiJackson
Corrugated steel (exposed fastener)$8,900$17,550$8,950$17,700
Standing-seam steel$17,550$33,900$17,700$34,150
Aluminum$13,700$27,200$13,800$27,350
Copper$29,100$57,950$29,300$58,350
Zinc$27,200$53,150$27,350$53,500

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

By size

Metal roof installation by roof size: Biloxi vs Jackson

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeBiloxiJackson
1,000 sq ft (10 squares)$7,950$15,650$8,000$15,750
1,500 sq ft (15 squares)$10,850$22,400$10,900$22,500
2,000 sq ft (20 squares)$12,750$29,100$12,850$29,300
2,500 sq ft (25 squares)$15,650$34,900$15,750$35,100
3,000+ sq ft (30 squares)$18,550$40,650$18,650$40,900

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Best time to buy

Cheapest time for metal roof installation in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Biloxi vs Jackson

Is metal roof installation cheaper in Biloxi or Jackson?

In 2026, metal roof installation is cheaper in Biloxi at about $20,950, versus $21,100 in Jackson — a difference of about $150 (1%).

Why does metal roof installation cost more in Jackson than Biloxi?

Jackson's higher labor index (0.94 vs 0.93 in Biloxi) is the biggest factor, with the hot/hot climate split playing a smaller role.

How much is metal roof installation in Biloxi, MS?

In Biloxi, metal roof installation typically runs $12,750–$29,100 in 2026, with most homeowners paying around $20,950.

When is the cheapest time to buy metal roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Biloxi and Jackson (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on metal roof installation cost?

Probably not. Yes, $150 is a real gap, but it's a one-time cost you can partly offset in Jackson with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik