Metal Roof Installation cost: Bend vs Hillsboro (2026)
The two metros aren't quite in sync on metal roof installation: Bend sits 3% below Hillsboro, or roughly $22,700 versus $23,400 — about $700 apart.
Bend OR
Lower costTypically around $22,700
Hillsboro OR
Typically around $23,400
Bend vs Hillsboro: full breakdown
| Factor | Bend | Hillsboro |
|---|---|---|
| Typical 2026 cost | $22,700 | $23,400 |
| Estimated range | $13,850–$31,550 | $14,250–$32,500 |
| Labor index (vs US) | ×1.04 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $13,600 | $14,050 |
| Materials/equipment | $9,100 | $9,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
How much should this gap actually matter?
3% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Bend vs Hillsboro
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Bend | Hillsboro |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,700–$19,050 | $9,950–$19,600 |
| Standing-seam steel | $19,050–$36,750 | $19,600–$37,850 |
| Aluminum | $14,900–$29,500 | $15,300–$30,350 |
| Copper | $31,550–$62,800 | $32,500–$64,700 |
| Zinc | $29,500–$57,600 | $30,350–$59,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Bend vs Hillsboro
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bend | Hillsboro |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,650–$16,950 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $16,950–$37,800 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $20,100–$44,050 | $20,700–$45,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Bend; we use Oregon regional price parity instead.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Bend vs Hillsboro
Is metal roof installation cheaper in Bend or Hillsboro?
Bend wins on price: metal roof installation runs about $22,700 there versus $23,400 in Hillsboro, a gap of roughly $700 (3%) as of 2026.
Why does metal roof installation cost more in Hillsboro than Bend?
It comes down to labor: Hillsboro indexes at 1.07 against Bend's 1.04. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Bend, OR?
metal roof installation in Bend runs $13,850–$31,550 as of 2026 — most jobs land near $22,700.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bend and Hillsboro, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $700 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Hillsboro can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik