Metal Roof Installation cost: Bend vs Gresham (2026)
In 2026, metal roof installation is about 3% less expensive in Bend than in Gresham. Most homeowners pay around $22,700 in Bend versus $23,400 in Gresham — a gap of roughly $700.
Bend OR
Lower costTypically around $22,700
Gresham OR
Typically around $23,400
Bend vs Gresham: full breakdown
| Factor | Bend | Gresham |
|---|---|---|
| Typical 2026 cost | $22,700 | $23,400 |
| Estimated range | $13,850–$31,550 | $14,250–$32,500 |
| Labor index (vs US) | ×1.04 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $13,600 | $14,050 |
| Materials/equipment | $9,100 | $9,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
At 3%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Bend vs Gresham
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Bend | Gresham |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,700–$19,050 | $9,950–$19,600 |
| Standing-seam steel | $19,050–$36,750 | $19,600–$37,850 |
| Aluminum | $14,900–$29,500 | $15,300–$30,350 |
| Copper | $31,550–$62,800 | $32,500–$64,700 |
| Zinc | $29,500–$57,600 | $30,350–$59,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Bend vs Gresham
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bend | Gresham |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,650–$16,950 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $16,950–$37,800 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $20,100–$44,050 | $20,700–$45,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Bend; we use Oregon regional price parity instead.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Bend vs Gresham
Is metal roof installation cheaper in Bend or Gresham?
Bend wins on price: metal roof installation runs about $22,700 there versus $23,400 in Gresham, a gap of roughly $700 (3%) as of 2026.
Why does metal roof installation cost more in Gresham than Bend?
Gresham's higher labor index (1.07 vs 1.04 in Bend) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Bend, OR?
Expect to pay $13,850 to $31,550 for metal roof installation in Bend in 2026, averaging around $22,700.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bend and Gresham, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $700 is a real gap, but it's a one-time cost you can partly offset in Gresham with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik