Metal Roof Installation cost: Bellevue vs Renton (2026)
Bellevue and Renton are a near-perfect match on metal roof installation cost in 2026, both landing around $25,950.
Bellevue WA
Typically around $25,950
Renton WA
Typically around $25,950
Bellevue vs Renton: full breakdown
| Factor | Bellevue | Renton |
|---|---|---|
| Typical 2026 cost | $25,950 | $25,950 |
| Estimated range | $15,800–$36,050 | $15,800–$36,050 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $15,550 | $15,550 |
| Materials/equipment | $10,400 | $10,400 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Bellevue vs Renton
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Bellevue | Renton |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $11,050–$21,750 |
| Standing-seam steel | $21,750–$42,000 | $21,750–$42,000 |
| Aluminum | $17,000–$33,700 | $17,000–$33,700 |
| Copper | $36,050–$71,800 | $36,050–$71,800 |
| Zinc | $33,700–$65,850 | $33,700–$65,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Bellevue vs Renton
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bellevue | Renton |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $9,850–$19,400 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $13,450–$27,750 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $15,800–$36,050 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $19,400–$43,200 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $22,950–$50,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Bellevue vs Renton
Is metal roof installation cheaper in Bellevue or Renton?
metal roof installation costs about the same in both — roughly $25,950 in each city.
Why does metal roof installation cost more in Renton than Bellevue?
It comes down to labor: Renton indexes at 1.19 against Bellevue's 1.19. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Bellevue, WA?
metal roof installation in Bellevue runs $15,800–$36,050 as of 2026 — most jobs land near $25,950.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $41.1/hr in the Seattle-Tacoma-Bellevue area and $41.1/hr in Seattle-Tacoma-Bellevue. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Bellevue and Renton: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Bellevue and Renton — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik