Metal Roof Installation cost: Bellevue vs Spokane (2026)
The two metros aren't quite in sync on metal roof installation: Bellevue sits 17% above Spokane, or roughly $25,950 versus $22,200 — about $3,750 apart.
Bellevue WA
Typically around $25,950
Spokane WA
Lower costTypically around $22,200
Bellevue vs Spokane: full breakdown
| Factor | Bellevue | Spokane |
|---|---|---|
| Typical 2026 cost | $25,950 | $22,200 |
| Estimated range | $15,800–$36,050 | $13,550–$30,850 |
| Labor index (vs US) | ×1.19 | ×1.02 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $13,300 |
| Materials/equipment | $10,400 | $8,900 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
A 17% gap is meaningful on a project this size — about $3,750. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Bellevue.
Metal roof installation by type: Bellevue vs Spokane
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Bellevue | Spokane |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,450–$18,600 |
| Standing-seam steel | $21,750–$42,000 | $18,600–$35,950 |
| Aluminum | $17,000–$33,700 | $14,550–$28,800 |
| Copper | $36,050–$71,800 | $30,850–$61,400 |
| Zinc | $33,700–$65,850 | $28,800–$56,300 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Bellevue vs Spokane
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bellevue | Spokane |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $11,500–$23,700 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $13,550–$30,850 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $16,600–$36,950 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $19,650–$43,050 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Spokane; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Bellevue vs Spokane
Is metal roof installation cheaper in Bellevue or Spokane?
Spokane wins on price: metal roof installation runs about $22,200 there versus $25,950 in Bellevue, a gap of roughly $3,750 (17%) as of 2026.
Why does metal roof installation cost more in Bellevue than Spokane?
The main driver is local labor rates: Bellevue's labor index is 1.19 versus 1.02 in Spokane. Climate zone (mixed vs mixed) and permit fees also shift the total.
How much is metal roof installation in Bellevue, WA?
Bellevue homeowners can expect $15,800 to $36,050 for metal roof installation in 2026, with $25,950 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Bellevue and Spokane: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $3,750 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Bellevue can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik